Pilot Valve (Travel) - Install
Show/hide table
Required Tools | |||
Tool | Part Number | Part Description | Qty |
A | FT2674 | Vacuum Cap | 1 |
Show/hide table
NOTICE |
---|
Care must be taken to ensure that fluids are contained during performance of inspection, maintenance, testing, adjusting, and repair of the product. Be prepared to collect the fluid with suitable containers before opening any compartment or disassembling any component containing fluids. Refer to Special Publication, PERJ1017, "Dealer Service Tool Catalog" for tools and supplies suitable to collect and contain fluids on Cat® products. Dispose of all fluids according to local regulations and mandates. |
- Position travel valve (8) and install bolts (7).
Show/hide table
Illustration 2 g00993085 - Position pedals (6) and install bolts (5).
Show/hide table
Illustration 3 g00993083 - Install rubber covers (4) on the pedals.
Show/hide table
Illustration 4 g00993079 - Connect hose assemblies (3).
Show/hide table
Illustration 5 g01012508 - Remove Tooling (A) from the hydraulic tank. Install cap (2) onto the hydraulic tank.
Show/hide table
Illustration 6 g01012505 - Position guard assembly (1) and install the bolts.
- Check the hydraulic tank oil level. Refer to Operation and Maintenance Manual, "Hydraulic System Oil Level - Check". Refer to Operation and Maintenance Manual, "Lubricant Viscosities and Refill Capacities".
Show/hide table
Illustration 1 | g00993086 |
Note: Make sure that the ports of travel valve (8) are in the correct position.
Caterpillar Information System:
321C LCR Excavator Machine Systems Pilot Valve (Travel) - Remove
M325C Material Handler Final Drive Oil - Change
321C LCR Excavator Machine Systems Boom Lighting - Remove and Install
M325C Material Handler Operation Information
315C Excavator Machine Systems Bucket Cylinder - Remove and Install
C4.4 Industrial Engine Increased Engine Oil Temperature - Inspect
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Assemble
M325C Material Handler Fuel System Water Separator Element - Replace
M325C Material Handler Final Drive Oil Level - Check
M325C Material Handler Final Drive Oil Sample - Obtain
C11 and C13 Engines for Caterpillar Built Machines Pistons and Connecting Rods - Disassemble
321C CR Excavator Engine Supplement Fan - Remove and Install
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Remove
321C LCR Excavator Machine Systems Pilot Valve (Joystick) - Install
315C Excavator Machine Systems Stick Cylinder - Remove and Install
2003/08/18 A New Egress Ladder is Used {7254, 7255}
345B Excavator Hydraulic System Counterweight (Removal and Installation Hydraulic System)
315C Excavator Machine Systems Boom Cylinder - Remove and Install
M325D MH Material Handler Window Washer Reservoir - Fill
2003/09/15 An Improved Alternator Belt is Used {1357}
2003/10/01 An Improved Alternator Belt is Used {1357}
321C LCR Excavator Machine Systems Swivel - Remove
321C LCR Excavator Machine Systems Swivel - Install
SW45 and SW60 Wheel Saws Frame (Rear) - Remove and Install