320C Excavator Machine System Specifications Caterpillar


Solenoid Valve (Quick Coupler)

Usage:

320C RAW



图 1g00904700

(1) 锁紧螺母的扭矩 ... 9.0 ± 0.5 N·m (7.0 ± 0.5 lb ft)

(2) 盘管

标称电压 ... 24 VDC
25 °C (77 °F) 环境温度和 121 °C (250 °F) 流体温度时的最大电压 ... 28.5 VDC
温度 25°±5°C (77° ± 9°F) 的电流 ... 32.6 ± 1.6 欧姆

工作温度范围 ... −40° 到 121°C (−40° 到 250°F)

(3) 电磁阀的扭矩 ... 115 ± 7 N·m (85 ± 5 lb ft)

注: 把电磁阀引线放在水平至少 15 度以下的位置。 这使水气不易进入电磁阀里。

(4) 滑阀组件

在温度为 105°C (221°F) 时用 SAE 10W 油,当压力降为 690 kPa (100 psi) 时,就会得到以下的流量。 ... 8.1 L/min (2.14 US gpm)

Caterpillar Information System:

H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Assemble
C-10, C-12, C-15 and C-16 Industrial Engines CID 0247 FMI 09 J1939 Data Link communications
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Assemble
C4.4 Industrial Engine Piston Ring Groove - Inspect
C4.4 Industrial Engine Cooling System - Inspect
304 Mini Hydraulic ExcavatorEngine Supplement and Machine Systems Engine Enclosure Group - Remove and Install
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Disassemble
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (Low Pressure) - Disassemble
M318C Excavator Hydraulic System Relief Valve (Medium Pressure/Cab Riser Function) - Test and Adjust
M318C Excavator Hydraulic System Flow (Medium Pressure/Cab Riser Function) - Test and Adjust
M318C Excavator Hydraulic System Flow (Medium Pressure Function) - Test and Adjust
H45/H45 S, H50/H50 S, 63/H63/H63 S, 70/70 S/H70/H70 S, H90C/H90C S and 100/H100/H100 S Hydraulic Hammers Hydraulic Accumulator (High Pressure) - Install
314C ExcavatorEngine Supplement Oil Pan - Remove and Install
325C Excavator 3126B Engine Supplement Engine Oil Cooler - Remove and Install
312C and 315C Excavators Tool Control System System G 1a: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1b: Relief Valve (Line) - Test and Adjust
312C and 315C Excavators Tool Control System System G 1c: Relief Valve (Line) - Test and Adjust - One-Way System
SW45, SW60, SW80, SW345B, SW360B, SW380B, SW460B and SW480B Wheel Saws Frame Slide Bars - Lubricate
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve (Medium Pressure)
2003/04/01 New Flash File Software Is Used for Product Link 151/201 {7620}
BP24 Pickup Broom Broom Brush
BP24 Pickup Broom Broom Hitch
BP24 Pickup Broom Debris Frame
312C and 315C Excavators Tool Control System System G14: Relief Valve (Line) - Test and Adjust - Auxiliary Control Valve
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.