C-10, C-12, C-15 and C-16 Industrial Engines Caterpillar


CID 0247 FMI 09 J1939 Data Link communications

Usage:

CPT372 1WZ
产生此代码的情况:

发动机控制模块(ECM)检测到 J1939 数据链路丧失通讯。

确保控制系统内的所有闪存文件都是现时的。

系统响应:

ECM 会记录该诊断代码。

  • 发动机可能工作异常和/或设备可能不具备发动机转速控制。

测试步骤 1. 进行以下的诊断步骤: 控制区域网络(CAN)数据链路电路 - 测试

结果:

  • 正常 - 停止

Caterpillar Information System:

EMCPII+ for Gas Engines GSC CID 0446 - FMI 12
C9 Marine Engines and C9 Marine Generator Sets Alternator - Remove and Install
C9 Marine Engines and C9 Marine Generator Sets Boost Pressure Sensor - Remove and Install
C4.4 Industrial Engine Piston Ring Groove - Inspect
C3.3 Industrial Engine Water Temperature Regulator - Test
C4.4 Industrial Engine Cooling System - Inspect
3500B Engines Engine Oil Sump Pump
2003/04/01 New Piston and Rod Group that Improves Cold Weather Operation {1225}
G3500B Engines Thermostatic Valve
3176C and 3196 Engines for Caterpillar Built Machines Inlet Manifold Temperature Sensor
G3520B Industrial Engine +8V Sensor Voltage Supply
C3.3 Industrial Engine Compression - Test
EMCPII+ for Gas Engines Block Diagram of Generator Set Control
EMCPII+ for Gas Engines Schematics and Wiring Diagrams
EMCPII+ for Gas Engines Engine Does Not Shutdown (for Engine with ECM)
EMCPII+ for Gas Engines Engine Does Not Shutdown (for Engine with EIS)
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Engine Oil Pressure Switch
C1.5 and C2.2 Engines for Caterpillar Built Marine Generator Sets Engine Lifting Bracket
EMCPII+ for Gas Engines GSC CID 0100 - FMI 02 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0100 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0110 - FMI 02 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0110 - FMI 02 (for Engine with EIS)
EMCPII+ for Gas Engines GSC CID 0248 - FMI 09 (for Engine with ECM)
EMCPII+ for Gas Engines GSC CID 0248 - FMI 09 (for Engine with EIS)
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.