Housing (Front)
Show/hide table
| |
| 图 1 | g02991698 |
Show/hide table
| 218-7272 前壳体总成的技术规格 | |||
| 项目 | 数量 | 零件 | 技术规格说明 |
| - | - | - | 在装配期间，壳体的后端面和缸体的前端面上绝不能有机油、燃油、水、污垢、装配固定胶以及任何其他污染物。 |
| - | - | - | 涂覆超蓝 Loctite 587 以便填充前壳体、发动机油底壳和缸体之间的结合缝隙。 |
| 1 | 17 | 6V-2317 螺栓 | 使用下列螺栓来安装前壳体总成：
M8 X 1.25 X 30 mm。 |
| 2 | 9 | 6V-5219 螺栓 | M8 X 1.25 X 40 mm。 |
| 3 | 1 | 3E-8016 自锁紧螺栓 | M8 X 1.25 X 25 mm。 |
Caterpillar Information System:
3054E Industrial Engine Crankshaft Pulley - Remove and Install
C13 Engine for Combat and Tactical Vehicles Flywheel Housing
UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Ethernet Interface
C1.5 and C2.2 Generator Sets Generator Lead Connections
C13, C15, and C18 Tier 4 Final Engines Gear Group (Front)
3054E Industrial Engine Crankshaft Rear Seal - Install
C11 and C13 Engines Piston Cooling Jet
3054E Industrial Engine Camshaft - Remove and Install
C9 Marine Engines Sensors and Electrical Connectors
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Fan Override Switch Circuit - Test
C13 Engine for Combat and Tactical Vehicles Crankshaft Seals
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Diagnostic Enable Switch Circuit - Test
3054E Industrial Engine Crankshaft Front Seal - Remove
3054E Industrial Engine Crankshaft Front Seal - Install
C13 and C15 Engines for Combat and Tactical Vehicles Remote PTO Accelerator Position Sensor Circuit - Test
320B, 320B L and 320B N Excavators Swing Drive Oil Sample - Obtain
3054E Industrial Engine Piston Cooling Jets - Remove and Install
3054E Industrial Engine Fuel Priming Pump and Fuel Filter Base - Remove and Install
2003/02/03 Special Instruction, REHS1238, "Obtaining Factory Passwords and Software Enabled Attachments" is Available {7610}
C1.5 and C2.2 Generator Sets Voltage Regulators
3406E, C-10, C-12, C-15, C-16 and C-18 On-highway Engines Service Brake Pedal Position (Switch 1) Circuit - Test
C11 and C13 On-Highway Engines Belt Tensioner
3054E Industrial Engine Engine Oil Filter Base - Remove and Install
3054E Industrial Engine Engine Oil Cooler - Remove