| |
| Illustration 1 | g00559405 |
The machine control pattern is initially set at the factory to the SAE pattern, as shown. The patterns can be changed to a multitude of combinations. If you want to change the settings consult your Caterpillar dealer. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.
Stick Out (1) - Move the joystick to this position in order to move the stick outward.
Swing Right (2) - Move the joystick to this position in order to swing the upper structure to the right.
Stick In (3) - Move the joystick to this position in order to move the stick inward.
Swing Left (4) - Move the joystick to this position in order to swing the upper structure to the left.
Boom Lower (5) - Move the joystick to this position in order to lower the boom.
Work Tool Raise (6) - Move the joystick to this position in order to raise the work tool.
Boom Raise (7) - Move the joystick to this position in order to raise the boom.
Work Tool Lower (8) - Move the joystick to this position in order to lower the work tool.
Hold (9) - When you release the joysticks from any position, the joysticks will return to the HOLD position. Movement of the upper structure will stop.
Two functions may be performed at the same time by moving a joystick diagonally.