Cab Tilt Control - If Equipped
Show/hide table
Do not enter or exit a cab while the cab is tilted. The operated must always remain seated and have his seat belt on while the cab is tilted. Personnel should maintain a minimum clearance of 10 m (33 ft) around the machine while the cab is tilted. Failure to follow the instruction or heed the warnings could result in injury or death. |
The switch for the tilt cab is located on the right cab panel.
Show/hide table
Illustration 1 | g00890982 |
Right side console |
Show/hide table
Tilt Up - Push down on the right side of the switch in order to tilt the cap upward. While the switch is pressed, the cab will continue to tilt. Release the switch in order to stop the cab from tilting. |
Show/hide table
Tilt Down - Push down on the left side of the switch in order to tilt the cap downward. While the switch is pressed, the cab will continue to tilt. Release the switch in order to stop the cab from tilting. |
When the switch is pressed, a warning alarm will sound. When the switch is released, the warning alarm will stop.
Note: The maximum tilt angle of the cab is 20 degrees.
Caterpillar Information System:
302.5 Mini Hydraulic Excavator Circuit Breakers - Reset
330C Excavator Machine Systems Boom Cylinder - Remove
302.5 Mini Hydraulic Excavator Track Adjustment - Adjust
304 CR Mini Hydraulic Excavator Hydraulic System Boom Hydraulic System
304 CR Mini Hydraulic Excavator Access Door and Cover Locations
5230 Excavator Hydraulic System Swing Parking Brake
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
5230 Excavator Hydraulic System Swing Motor
307C Excavator Machine Systems Main Hydraulic Pump - Install
330C Excavator Machine Systems Stick - Remove
330C Excavator Machine System Specifications Recoil Spring
302.5 Mini Hydraulic Excavator Cab Door - If Equipped
325C Excavator Joystick Controls
330C Excavator Work Tool Control
2007/08/20 C-12/3176C/3196 Front Housing Bolts {1151}
304 CR Mini Hydraulic Excavator Hydraulic System Swing Boom Hydraulic System
322C and 325C Forest Machines Hydraulic System Travel Hydraulic System
307C Excavator Engine Supplement Air Inlet Manifold - Remove
318C Excavator Tool Control System Controller
3306C Engines for Caterpillar Built Machines Alternator and Regulator
303.5 Mini Hydraulic Excavator Lubricant Viscosities
307C Excavator Engine Supplement Air Inlet Manifold - Install
307C Excavator Machine Systems Relief Valve (Pilot) - Remove and Install
304 CR Mini Hydraulic Excavator Machine System Specifications Main Hydraulic Pump