302.5 Mini Hydraulic Excavator Caterpillar


Cab Door - If Equipped

Usage:

302.5 4AZ


Illustration 1g00518379

Pull the cab door handle outward in order to open the cab door from the outside of the machine. For additional ventilation, open the cab door all the way and secure the cab door to the catch on the wall of the cab.



Illustration 2g00518380

Move the cab door release lever upward in order to release the cab door from the catch.



Illustration 3g00349478

Push the inside cab door handle away from you in order to open the door from the inside of the machine. Always operate the machine so that the cab door is securely fastened in the open or the closed position.

Caterpillar Information System:

304 CR Mini Hydraulic Excavator Specifications
330C Excavator Specifications - Retrofit Boom
385B and 5090B Excavators Excavator Systems Bucket Linkage - Install
5230 Excavator Hydraulic System Solenoid Valve (Swing Signal)
330C Excavator Machine Systems Boom - Remove
330C Excavator Specifications - Ultrahigh Demolition Configuration
3056E Industrial Engine Crankshaft
304 CR Mini Hydraulic Excavator Hydraulic System Main Control Valve
5110B Excavator Machine Electronic Control System General Information
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Manifold - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 2840 mm (111.8 inch)
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 4670 mm (183.9 inch)
330C Excavator Machine System Specifications Recoil Spring
330C Excavator Machine Systems Stick - Remove
307C Excavator Machine Systems Main Hydraulic Pump - Install
5230 Excavator Hydraulic System Swing Motor
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
5230 Excavator Hydraulic System Swing Parking Brake
304 CR Mini Hydraulic Excavator Access Door and Cover Locations
304 CR Mini Hydraulic Excavator Hydraulic System Boom Hydraulic System
302.5 Mini Hydraulic Excavator Track Adjustment - Adjust
330C Excavator Machine Systems Boom Cylinder - Remove
302.5 Mini Hydraulic Excavator Circuit Breakers - Reset
325C Excavator Cab Tilt Control - If Equipped
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.