Specifications
Show/hide table
 | |
| 图 1 | g00880822 |
Show/hide table
| 304CR挖掘机 (1) | ||
|---|---|---|
| 橡胶履带 | 钢质履带 | |
| 近似重量 (带驾驶室的机器) | 4220 kg (9303.50 lb) |
4360 kg (9612.14 lb) |
| 近似重量 (带顶棚的机器) | 4170 kg (9193.27 lb) |
4310 kg (9501.91 lb) |
| 总长 (A) | 5190 mm (17.03 ft) |
|
| 动臂高度 (B) | 1715 mm (5.63 ft) |
|
| 驾驶室的高度 (C) | 2595 mm (8.51 ft) |
2570 mm (8.43 ft) |
| 总宽 (D) | 1980 mm (6.5 ft) |
|
| 履带板宽度 (E) | 400 mm (1.31 ft) |
|
| 离地间隙 (包括凸起高度) (F) | 335 mm (1.1 ft) |
310 mm (1.02 ft) |
| 尾部旋转半径 (C) | 990 mm (3.25 ft) |
|
| 履带总长度 (H) | 2450 mm (8.04 ft) |
|
| 铲刀高度 (I) | 380 mm (1.25 ft) |
|
| 铲刀宽度 (J) | 1980 mm (6.5 ft) |
|
| 在 转动中心中央 之间的距离 (K) | 1920 mm (6.30 ft) |
|
| 接地压力(带驾驶室的机器) | 25.0 kPa (3.63 psi) |
25.8 kPa (3.74 psi) |
| 接地压力(带顶棚的机器) | 24.7 kPa (3.58 psi) |
25.5 kPa (3.70 psi) |
| 高行驶速度 | 4.6 km/h (2.8 mph) |
4.2 km/h (2.6 mph) |
| 低行驶速度 | 2.6 km/h (1.6 mph) |
2.4 km/h (1.4 mph) |
| 最大坡度 | 58% 或 30° | |
Show/hide table
| ( 1 ) | 这些技术规格为一台有一个回转动臂、一个标准斗杆和一个0.14 m3 (0.18 yd3)标准型铲斗的机器。 |
Show/hide table
| 304CR 带驾驶室的挖掘机 动臂回转角 (L) |
||
| 动臂回转角 挖掘铲斗 |
动臂回转角 清沟铲斗 |
|
| 动臂回转挡块出厂的安装位置 | 55° | 55° |
| 动臂回转挡块在倒置位置。 | 80° | 铲斗将撞击驾驶室。 |
| 动臂回转挡块没安装。 | 铲斗将撞击驾驶室。 | 铲斗将撞击驾驶室。 |
Show/hide table
| 304CR 挖掘机 | ||
| 标准铲刀 | 角铲 | |
| (A) 最大提升高度 | 450 mm (1.48 ft) |
455 mm (1.4929 ft) |
| (B) 最大挖掘深度 | 430 mm (1.4 ft) |
515 mm (1.69 ft) |
| (C) 铲刀工作角 | 30° | 25° |
Caterpillar Information System:
330C Excavator Specifications - Retrofit Boom
385B and 5090B Excavators Excavator Systems Bucket Linkage - Install
5230 Excavator Hydraulic System Solenoid Valve (Swing Signal)
330C Excavator Machine Systems Boom - Remove
330C Excavator Specifications - Ultrahigh Demolition Configuration
3056E Industrial Engine Crankshaft
304 CR Mini Hydraulic Excavator Hydraulic System Main Control Valve
5110B Excavator Machine Electronic Control System General Information
MP-15, MP-20, MP-30 and MP-40 Multi Processors Control Manifold - Remove and Install
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 2840 mm (111.8 inch)
365B and 365B Series II Excavators and 365B Series II Front Shovel Machine System Specifications Stick - 4670 mm (183.9 inch)
307C Excavator Engine Supplement Water Temperature Regulator - Remove and Install
302.5 Mini Hydraulic Excavator Cab Door - If Equipped
330C Excavator Machine System Specifications Recoil Spring
330C Excavator Machine Systems Stick - Remove
307C Excavator Machine Systems Main Hydraulic Pump - Install
5230 Excavator Hydraulic System Swing Motor
Air Conditioning and Heating R134a for All Caterpillar Machines Refrigerant Compressor
5230 Excavator Hydraulic System Swing Parking Brake
304 CR Mini Hydraulic Excavator Access Door and Cover Locations
304 CR Mini Hydraulic Excavator Hydraulic System Boom Hydraulic System
302.5 Mini Hydraulic Excavator Track Adjustment - Adjust
330C Excavator Machine Systems Boom Cylinder - Remove
302.5 Mini Hydraulic Excavator Circuit Breakers - Reset