Electronic Modular Control Panel II (EMCP II) For MUI Engines Caterpillar

General Information

Usage:

3304 02B

Show/hide table

Do not connect generator to a utility electrical distribution system unless it is isolated from the system. Electrical feedback into the distribution system can occur and could cause personal injury or death.

Open and secure main distribution system switch, or if the connection is permanent, install a double throw transfer switch to prevent electrical feedback. Some generators are specifically approved by a utility to run in parallel with the distribution system and isolation may not be required. Always check with your utility as to the applicable circumstances.

Show/hide table

When the engine-generator, or any source to which the engine-generator is synchronized to, is operating, voltages up to 600V are present in the control panel.

Do not short these terminal with line voltage to ground with any part of the body or any conductive material. Loss of life or injury could result from electrical shock or injury from molten metal.

Show/hide table

When servicing or repairing electric power generation equipment:

Make sure the unit is either locked out or tagged DO NOT OPERATE.

Remove all fuses.

Make sure the generator engine is stopped.

Make sure all batteries are disconnected.

Make sure all capacitors are discharged.

Make sure residual voltage in the rotor, stator and the generator is discharged.

Failure to do so could result in personal injury or death.