Air Conditioner Belt - Remove and Install
Remove the Air Conditioner Belt
Start By:
- Remove the alternator belt.
- Loosen bolt (1) .
Show/hide table
Illustration 1 | g00470442 |
- Loosen bolt (2) and relieve the tension on the belt. Remove air conditioner belt (3) .
Install the Air Conditioner Belt
- Install air conditioner belt (3). Tighten bolt (2) .
Show/hide table
Illustration 2 | g00470442 |
- Put the correct amount of tension on the air conditioner belt and tighten bolt (1) .
Note: Refer to Operation and Maintenance Manual, SEBU7115 for the correct belt tension.
End By: Install the alternator belt.
Caterpillar Information System:
631E Series II Wheel Tractor-Scrapers Auger Hydraulic System Oil Filter - Replace
980G Wheel Loader Hydraulic System Vane Pump (Implement and Hydraulic Fan)
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Visual Inspection
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Machine Preparation for Troubleshooting
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train Hydrostatic System - Test and Adjust
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Troubleshooting Information
D7R Track-Type Tractor Hydraulic System Ripper Lift Cylinder
IT14G Integrated Toolcarrier and 914G Wheel Loader Power Train General Testing and Adjusting Information
Critical Dimensions for Bucket Control Linkage {6107} Critical Dimensions for Bucket Control Linkage {6107}
902 and 906 Compact Wheel Loaders Steering System Hydraulic Oil Contamination - Test
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Remove
963C Track-Type Loader Machine Systems Blower Motor (Air Conditioner and Heater) - Remove and Install
D8R Track-Type Tractor Engine Air Filter Primary Element - Clean/Replace
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Disassemble
992G Wheel Loader Machine Systems Piston Pump (Fixed Displacement) - Assemble
953C Track-Type Loader Machine Systems Refrigerant Compressor - Remove and Install
615C Series II Wheel Tractor-Scraper Wheel Tractor Power Train Selector Valve (Torque Converter Lockup Clutch) - Disassemble
D7R Track-Type Tractor Hydraulic System Main Relief Valve
950G Wheel Loader, 962G Wheel Loader and IT62G Integrated Toolcarrier Hydraulic System Pilot Valve (Joystick)
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Disassemble
953C Track-Type Loader Machine Systems Refrigerant Condenser - Remove and Install
3304B and 3306B Engines for Caterpillar Built Machines Engine Oil Cooler - Assemble
953C Track-Type Loader Machine Systems Refrigerant Condenser Fan and Fan Motor - Remove and Install
3406E and 3456 Engines for Caterpillar Built Machines Basic Engine