1. Remove the load from the engine.
2. Allow the engine to run at about half speed for five minutes. This allows internal temperatures to reduce gradually and prevents the loss of coolant by "afterboil".
3. Reduce speed to low idle for about 30 seconds.
4. Stop the engine by turning the START switch to OFF. The governor control will not stop the engine.

If an engine is going to be put in storage see your Caterpillar dealer for storage instructions.

Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.