Battery and Battery Cable - Separate and Connect
Separation Procedure
Start By:
- Tilt the operator platform. Refer to Disassembly and Assembly, "Operator Platform - Tilt".
- Turn the engine start switch to the OFF position. Turn all switches to the OFF position.
- Turn the battery disconnect switch to the OFF position. Remove the battery disconnect switch key.
- Disconnect battery cable (6) from battery (4) .
Show/hide table
Illustration 1 | g00851999 |
Note: Do not allow the disconnected battery cables to contact the disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
- Disconnect battery cable (3) from battery (4) .
- Disconnect battery cable (2) from battery (1) .
- Disconnect battery cable (5) from battery (1) .
Connection Procedure
- Connect battery cable (5) to battery (1) .
Show/hide table
Illustration 2 | g00851999 |
Note: Do not allow the disconnected battery cables to contact the disconnect switch. Do not allow the disconnected battery cables to contact the other cables. Do not allow the disconnected battery cables to contact the opposite terminal of either battery.
- Connect battery cable (2) to battery (1) .
- Connect battery cable (3) to battery (4) .
- Connect battery cable (6) to battery (4) .
End By: Lower the operator platform. Refer to Disassembly and Assembly, "Operator Platform - Tilt".
Caterpillar Information System:
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Using the Diagnostic Indicator to Determine Diagnostic Codes
CB-634D Vibratory Compactor Machine Systems Hydraulic System Pressure - Release
CB-634D Paving Compactor Engine Water Pump - Inspect
16H Motor Grader Engine Oil and Filter - Change
16H Motor Grader Engine Oil Sample - Obtain
CB-634D Vibratory Compactor Machine Systems Steering Frame Lock - Separate and Connect
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Refrigerant Compressor - Remove and Install
CB-634D Paving Compactor Engine Oil and Filter - Change
16H Motor Grader Engine Oil Level - Check
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System Diagnostic Capabilities
CP-433E, CS-423E and CS-433E Paving Compactors Platform Tilting
CB-634D Paving Compactor Engine Oil Sample - Obtain
CB-634D Paving Compactor Fuel System - Prime
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Engine Oil Pressure - Test
416D Backhoe Loader Backhoe Stabilizer Controls
14H Motor Grader Ether Starting Aid Cylinder - Replace
CB-634D Paving Compactor Fuel System Secondary Filter - Replace
140H and 160H Motor Graders Electronic Unit Injector - Inspect/Adjust
CB-634D Paving Compactor Fuel System Water Separator - Drain
C0.5, C0.7, C1.1/3011C, C1.5/3013C, C1.6 and C2.2/3024C/3024CT Industrial Engines and Engines for Caterpillar Built Machines Cylinder Head - Inspect
CB-634D Paving Compactor Fuel Tank Cap and Strainer - Clean
16H Motor Grader Drawbar Ball and Socket End Play - Check/Adjust
570B Wheel Harvester and 580B Wheel Harvester Engine Supplement Machine Preheater - Remove and Install
CB-634D Paving Compactor Fuel Tank Water and Sediment - Drain