Illustration 1 | g00790510 |
203-5486 Bank Valve (Four) |
(1) Stick control valve
(2) Bucket control valve
(3) Swing control valve
(4) Boom control valve
(5) Torque for the plug ... 70.0 ± 7.0 N·m (52.00 ± 5.00 lb ft)
(6) 202-2236 Bank Cover and Valve Gp
(7) Torque for the relief valve ... 70.0 ± 7.0 N·m (52.00 ± 5.00 lb ft)
(8) Solenoid valve for the hydraulic shutoff circuit
- Torque for nut (9) ... 9.5 ± 1.5 N·m (7.00 ± 1.00 lb ft)
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
- Nominal voltage for the coil ... 12 VDC
- Maximum voltage ... 14.5 VDC
- Resistance at a temperature of 25° ± 5°C (77.0° ± 9.0°F) ... 10.5 ± 0.3 Ohms
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
(10) The O-ring plug
- Torque for the O-ring plug ... 14.0 ± 1.0 N·m (10.00 ± 1.00 lb ft)
- Torque for the orifice ... 6.8 ± 0.5 N·m (60.00 ± 4.00 lb in)
(11) Torque for the plug ... 70.0 ± 0.5 N·m (52.00 ± 0.4 lb ft)
(12) Outlet
(13) Solenoid valve for the side shift lock circuit
- Torque for nut (14) ... 5.5 ± 1.5 N·m (4.00 ± 1.00 lb ft)
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
- Nominal voltage for the coil ... 12 VDC
- Maximum voltage ... 14.5 VDC
- Resistance at a temperature of 25° ± 5°C (77.0° ± 9.0°F) ... 10.5 Ohms
- Torque for the solenoid ... 50.0 ± 5.0 N·m (37.00 ± 3.00 lb ft)
(15) Torque for the nuts ... 27.0 ± 3.0 N·m (20.00 ± 2.00 lb ft)
Note: Place three 4T-2723 Shims between the valve sections during assembly. Place one shim over each stud. The shims are necessary in order to prevent the spool from binding in the valve body.