Stabilizer Cylinder
Show/hide table
 | |
| Illustration 1 | g00951843 |
206-0522 Stabilizer Cylinder Gp | |
(1) After assembly, the bearings can not extend beyond the surfaces of the rod.
- Diameter of the bearing after installation ... 40.185 ± 0.058 mm (1.5821 ± 0.0023 inch)
(2) Torque for the bolt ... 2100 ± 250 N·m (1540.0 ± 185.0 lb ft)
(3) Diameter of the cylinder ... 101.60 ± 0.08 mm (4.000 ± 0.003 inch)
(4) Before assembly, lubricate the sealing lip with the fluid that is being sealed.
(5) After assembly, the bearings can not extend beyond the surfaces of the rod.
- Diameter of the bearing before installation ... 40.288 ± 0.020 mm (1.5861 ± 0.0008 inch)
(6) Before assembly, lubricate the threads with clean grease.
- Diameter of the lands ... 54.25 ± 0.03 mm (2.136 ± 0.001 inch)
- Torque for the head ... 600.0 ± 130.0 N·m (440.00 ± 95.00 lb ft)
(7) Diameter of the rod ... 53.975 mm (2.1250 inch)
(8) Before assembly, apply 4C-4032 Bearing Mount Compound to the wiper seal groove.
Caterpillar Information System:
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Engine Shutdown Switch Circuit - Test
Machine Security System Software - Uninstall - "Immobilizer" Feature
SR4 Generator with VR3 or VR4 Voltage Regulator Lead Connections
CP-563C and CS-563C Vibratory Compactors Engine Starting
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0190 - FMI 02
3176C, 3196 and 3406E Engines for Caterpillar Built Machines Air Filter Restriction Lamp - Test
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Stabilizer Cylinder
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E100 Low Engine Oil Pressure Warning
2001/10/15 New Tooling Is Available For The Assembly Of the Slack Adjusters {4261}
3408E Engine Supplement for 769D Off-Highway Trucks and 771D Off-Highway Quarry Trucks Engine and Torque Converter - Remove
3176C, 3196 and 3406E Engines for Caterpillar Built Machines E096 High Fuel Pressure
SR4 Generator with VR3 or VR4 Voltage Regulator General Information
914G Compact Wheel Loader and IT14G Integrated Toolcarrier Transmission Electronic Control System MID 079 - CID 0346 - FMI 03
SR4 Generator with VR3 or VR4 Voltage Regulator Service Tools
SR4 Generator with VR3 or VR4 Voltage Regulator Troubleshooting
CP-563C and CS-563C Vibratory Compactors Engine Starting with Jump Start Cables
CP-563C and CS-563C Vibratory Compactors Engine and Machine Warm-Up
TL5 Series Field Cultivator Safety Signs and Labels
3176C, 3406E and 3456 Engines for 816F, 826G Series II, and 836G Landfill Compactors, 815F and 825G Series II Soil Compactors, 814F, 824G Series II, and 834G Wheel Dozers, and for the 988G Wheel Loader E190 Engine Overspeed Warning
416D, 420D, 424D, 428D, 430D, 432D, 438D and 442D Backhoe Loaders Hydraulic and Steering System Boom Cylinder
CP-563C and CS-563C Vibratory Compactors Lifting and Tying Down the Machine
CP-563C and CS-563C Vibratory Compactors Cab Tilting
966G Series II and 972G Series II Wheel Loaders Engine Supplement Crankshaft Front Seal - Remove - Engine in Chassis