Trip Hourmeter Mode
Illustration 1 | g00298101 |
Display Area |
The main display module keeps track of the trip hourmeter. The trip hourmeter will accumulate machine distance based upon the vehicle speed that is received from the transmission ECM. The total trip hourmeter is shown on the six digit display area when you are in trip hourmeter mode. The symbol for the trip hourmeter is ON in order to indicate when the display is functioning as a trip hourmeter. The value is continuously updated when the engine is operating.
The main display module monitors the following electrical inputs in order to determine when the machine engine is operating: the engine speed, terminal for alternator "R" and the engine oil pressure. The main display module starts the trip hourmeter for the machine when one of these inputs is in the normal range.
Trip Odometer Mode
Illustration 2 | g00298418 |
Display Area |
The total distance for the machine is displayed on the six digit display area when the main display module is in trip odometer mode. The indicator for the units shows "MILES" or "KM". This depends on the setting for units of measure of the main display module. The main display module receives information from the frequency sensor from the transmission ECM. This is done by using the CAT data link. The unit of measure can be set by using the units mode. See Systems Operation, "Units Mode" for more information.
Trip Fuel Consumption Mode
Illustration 3 | g00678891 |
Display Area |
The fuel level is shown on the six digit display area when the main display module is in fuel level mode. The display will show "% full", and no unit indicators are illuminated. The main display module calculates fuel level from a resistive sender, which is directly connected to the main display module.