Blade Valve and Mounting
Show/hide table
Illustration 1 | g00701155 |
(1) The adjustment for the blade control cable ... 5.5 ± 0.8 mm (0.22 ± 0.03 inch)
(2) The heads of the bolts should face inward toward the center of the machine.
(3) Apply 9S-3263 Thread Lock Compound to the threads.
(4) The pressure setting for the relief valve is the charge pressure plus 8275 ± 345 kPa (1200 ± 50 psi).
Caterpillar Information System:
3034 Engine for Caterpillar Built Machines Camshaft - Install
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Assemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Air/Hydraulic Cylinder (Front Caliper) - Disassemble
2000/04/24 Rework for Certain Rear Lamp Housing Groups {1429}
24H Motor Grader Plate Locations and Film Locations
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Electronic Technician) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
776D Wheeled Tractor and 777D and 777D HAA Off-Highway Trucks Power Train Transmission and Transfer Gears - Separate
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Assemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Service Brake (Front Caliper) - Disassemble
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Front Suspension (Cylinder) - Install
CS-531D, CP-533D and CS-533D Vibratory Compactors Sampling Interval and Location of Sampling Valve
3114, 3116, and 3126 Engines Fuel System - Prime
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Front) - Remove and Install
Installation Procedure for Motorized Flow Control{5051} Installation Procedure for Motorized Flow Control{5051}
24H Motor Grader Battery Disconnect Switch
776D, 777D and 777D HAA Off-Highway Trucks Machine Systems Cover (Cab Rear) - Remove and Install
834G Wheel Dozer and 836G Landfill Compactor Power Train Engagement Pressure for the Lockup Clutch of the Torque Converter (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Time for the Transmission Clutch (Caterpillar Monitoring System) - Calibrate
834G Wheel Dozer and 836G Landfill Compactor Power Train Fill Time for the Transmission Clutch (Electronic Technician) - Calibrate
797 Off-Highway Truck Power Train Relief Valve (Rear Axle Motor Unloader) - Disassemble
2000/04/17 The Torque For The Nuts On The Injector Wiring Harness Has Been Increased {1290}
24H Motor Grader Engine Start Switch
24H Motor Grader Drawbar Ball and Socket End Play - Check/Adjust