Serviceable Parts of the Fuel Injection Pump {1251, 1251}
- Integrated Toolcarrier:
- IT14G (S/N: 8ZM1-UP; 1WN1-UP)
- Wheel Loader:
- 914G (S/N: 7ZM1-UP; 9WM1-UP)
The 123-2937 Fuel Injection Pump has several service parts that can be replaced. See Table 1.
Show/hide table
Serviceable Parts of the 123-2937 Fuel Injection Pump     | |||
Item     | Quantity     | Part Number     | Description     |
1     | 1     | 7W-6249     | Shutoff Solenoid     |
2     | 1     | 127-2231     | O-Ring Seal     |
3     | 1     | 141-8946     | Seal     |
4     | 1     | 141-8942     | Seal     |
5     | 1     | 141-8943     | Lockwasher     |
6     | 1     | 141-8944     | Screw     |
7     | 1     | 149-7634     | Pipe     |
8     | 1     | 141-8947     | Thermocouple     |
9     | 1     | 141-8948     | Seal     |
10     | 2     | 165-3811     | Bolt     |
Caterpillar Information System:
988G Wheel Loader Power Train Differential and Bevel Gear - Install - Rear
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Vane Pump (Implement)
2000/05/01 New Axle Housings Increase the Parts' Commonality {3259, 3260, 3278}
725 and 730 Articulated Trucks Oscillating Hitch - Lubricate
Installation of the 172-9321 Metering Pump for the Steering System{4312} Installation of the 172-9321 Metering Pump for the Steering System{4312}
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ Switch Circuits
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Before Paving Setup
2000/03/06 An Improved Input Pinion Is Now Used {3254, 3256, 3258}
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Travel Motor
3508B Engine for 854G Wheel Dozers and 992G Wheel Loaders Injector Solenoids
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed End Gates
784C, 785B, 785C, 785D, 789B, 789C, 789D, 793B, 793C, 793D, 797 and 797B Off-Highway Trucks VIMS ™ MID 049 - CID 1422 - FMI 12
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Breather - Inspect/Replace
CB-535B Vibratory Compactor Vibratory System Relief Valve (Pressure Override) - Test and Adjust
550 Wheel Harvester, 570 Wheel Harvester and 580 Wheel Harvester Power Train Traction Control System
8-16B, 10-20B and 10-20WB Extend-A-Mat<COMP-BREAK TAGNAME=cp850>©<COMP-RESUME> Screed Cut Off Shoe Installation
AP-1000B and BG-260C Asphalt Pavers Auxiliary System Shutoff Valve (Ventilation System)
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Sensors
3408E and 3412E Engines for Caterpillar Built Machines Camshaft Bearings - Remove
312C, 315C, 318C, 319C, 320C, 321C, 322C, 325C, 330C and M325C Excavators and 325C MHPU and 330C MHPU Mobile Hydraulic Power Units Engine and Pump Control - V2 Senders
988G Wheel Loader Power Train Differential and Bevel Gear - Assemble
725 and 730 Articulated Trucks Hoist, Steering, and Brake System Oil Level - Check
140H and 160H Motor Graders Cutting Edges and End Bits - Inspect/Replace
2006/03/27 The Differential and Bevel Gear Group Has Been Updated {3251, 3258}