Drum Offset Control
Show/hide table
Illustration 1 | g00669939 |
Move the switch to the left in order to offset the drum to the left. Move the switch to the right in order to offset the drum to the right. Move the switch to the center in order to maintain the drum in the correct position. The switch will return to the center position when the switch is released from the left or the right position.
Show/hide table
Illustration 2 | g00684742 |
Drum Offset Indicators |
The drum offset indicators will tell you when the drum is offset.
Show/hide table
CB-535B     | ||
---|---|---|
Steering Type     | Inside Radius     | Outside Radius     |
LH Steering     | 4597 mm (15 ft)     |
6674 mm (22 ft)     |
RH Steering     | 4597 mm (15 ft)     |
6674 mm (22 ft)     |
RH Steering, Offset On LH     | 864 mm (28 ft)     |
10538 mm (35 ft)     |
RH Steering, Offset On RH     | 8731 mm (29 ft)     |
10830 mm (36 ft)     |
LH Steering, Offset On RH     | 8640 mm (28 ft)     |
10538 mm (35 ft)     |
LH Steering, Offset On LH     | 8731 mm (29 ft)     |
10830 mm (36 ft)     |
Caterpillar Information System:
CB-535B Vibratory Compactor Engine Water Pump - Inspect
CB-535B Vibratory Compactor Engine Valve Lash - Check
CB-535B Vibratory Compactor Engine Oil and Filter - Change
CB-535B Vibratory Compactor Engine Oil Sample - Obtain
CB-535B Vibratory Compactor Engine Oil Level - Check
1999/12/06 New Service Magazine Format {0374, 1000, 7000}
CB-535B Vibratory Compactor Engine Mounts - Inspect
2000/01/10 Oil Filler Cap is Now Attached with a Lanyard {1316}
CB-535B Vibratory Compactor Engine Crankcase Breather - Clean - Engine Crankcase Breather Hose
CB-535B Vibratory Compactor Engine Air Filter Service Indicator - Inspect
CB-535B Vibratory Compactor Engine Air Filter Secondary Element - Replace
CB-535B Vibratory Compactor Engine Air Filter Primary Element - Clean/Replace
3054B Industrial Engine Engine Oil Filter Base - Remove
3054B Industrial Engine Engine Oil Filter Base - Install
3054B Industrial Engine Engine Oil Filter Base - Disassemble
TH62, TH63, TH82 and TH83 Telehandlers Braking System Service Brake Air - Purge
1999/12/20 Change to Tightening Procedure for Cylinder Head Bolts in Specifications, RENR1217 and Specifications, SENR5182 {1100}
TH62, TH63, TH82 and TH83 Telehandlers Hydraulic System Towing Hitch System - If Equipped
2000/02/21 New Air Cleaner Support and Exhaust Tube Bracket Available for 24H Motor Grader, D10R Track-Type Tractor, and the 651E and 657E Wheel Tractor Scrapers {1051, 1061}
2000/01/03 Locations Where New Tube Assemblies Are Used {1274}
2000/02/07 New Procedure to Test DASA 280C on Excavators With the HH65 Harvester Head {7610, 7620}
C-9 Engine for TK711, TK721, TK722, TK732, TK741, TK751, and TK752 Track Feller Bunchers CID 0261 FMI 13 Engine Timing Calibration required
988G Wheel Loader Power Train NoSPIN Differential
554 and 574 Forwarders Power Train Oil Level Sensor (Power Train Oil Tank)