Hood and Dust Ejector - Remove and Install
Removal Procedure
Show/hide table
Required Tools     | |||
---|---|---|---|
Tool     | Part Number     | Part Description     | Qty     |
A     | 138-7575     | Link Bracket     | 1     |
0S-1595 | Bolt     | 1     | |
B     | 138-7573     | Link Bracket     | 2     |
0S-1595 | Bolt     | 1     |
- Remove clamp (2) and hose (4) from dust ejector (1). Remove bolt (3), the two washers, and the nut. Remove clamp (5) and dust ejector (1) from muffler (6) .
Show/hide table
Illustration 1 | g00639597 |
- Install Tooling (A) and Tooling (B) to hood (7) .
Show/hide table
Illustration 2 | g00639599 |
- Remove two bolts (11) and the washers. Remove plate (10) and plate (9). Remove slide (8). Repeat this procedure for the other side of the machine.
Show/hide table
Illustration 3 | g00639601 |
- Remove bolt (14), the washer, and plate (13). Remove mounting (12) .
Show/hide table
Illustration 4 | g00639608 |
Installation Procedure
- Install Tooling (A) and Tooling (B) to hood (7). Position hood (7) in the original location.
Show/hide table
Illustration 5 | g00639599 |
- Install mounting (12). Install plate (13), the washer, and bolt (14) .
Show/hide table
Illustration 6 | g00639608 |
- Install slide (8). Install plate (9) and plate (10). Install two bolts (11) and the washers. Repeat this procedure for the other side of the machine.
Show/hide table
Illustration 7 | g00639601 |
- Install clamp (5) and dust ejector (1) to muffler (6). Install bolt (3), the two washers, and the nut. Install clamp (2) and hose (4) to dust ejector (1) .
Show/hide table
Illustration 8 | g00639597 |
Caterpillar Information System:
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller Arm Cylinder - Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Feed Roller Arm Cylinder - Remove
12H, 140H and 160H Motor Graders Power Train Transmission Oil Cooler - Install
980G Wheel Loader Power Train NoSPIN Differential
3114, 3116, and 3126 Engines for Caterpillar Built Machines Crankshaft Main Bearings - Install
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Hydraulic Accumulator (Suspension)
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks User Defined Shutdown Input
Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084} Implement Hydraulic Operations for Parallel Flow Systems{5000, 5051, 5057, 5084}
3056 Engine for Caterpillar Built Machines Inlet and Exhaust Valve Springs - Remove and Install
572R Pipelayer Engine Supplement Water Pump - Remove
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Tilt Cylinder - Install
572R Pipelayer Engine Supplement Water Pump - Install
12H, 140H and 160H Motor Graders Power Train Differential Lock Valve - Remove and Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Wastegate Solenoid
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm - Remove
TH62, TH63, TH82 and TH83 Telehandlers Radiator Screen - Clean
572R Pipelayer Engine Supplement Fan and Fan Drive - Remove and Install
3500B Engines for 776D, 777D, 784C, 785C, 789C and 793C Off-Highway Trucks Engine Sensor Open/Short Test
572R Pipelayer Engine Supplement Radiator Core - Remove and Install
HH45, HH55, HH65 and HH75 Harvester Heads Tree Harvester Head Measuring Arm Cylinder - Remove
Installation Instructions for a Turbocharger With a Water Cooled Turbocharger Cartridge{1050, 1065} Installation Instructions for a Turbocharger With a Water Cooled Turbocharger Cartridge{1050, 1065}
D250E Series II and D300E Series II Articulated Trucks Steering, Suspension, and Body Hoist Hydraulic Systems Steering Cylinder
3126B Engines for Caterpillar Built Machines Unit Injector - Remove
3524B Engines for Off-Highway Trucks Can Not Reach Top Engine RPM