Governor Control Linkage
Usage:
(1) Clearance on both sides of tang. (2) Governor control linkage. (3) Pedal (full travel). (4) Governor control. (5) Lever assembly.
Linkage Adjustment
1. Push accelerator pedal (3) down against its stop.
2. Adjust linkage between lever assembly (5) and the accelerator pedal until there is clearance on both sides of the tang (1) in lever assembly.
3. Check the linkage adjustment, push the pedal (3) down against the stop. If the linkage adjustment is correct, the governor linkage (2) will move to the break-over position when the pedal is against the stop. This is shown by clearance on both sides of the tang, the governor linkage (2) is adjusted correctly to permit the engine to operate at high idle.
Caterpillar Information System:
3406C DIESEL TRUCK ENGINE Switch Group (Used On Engines With BrakeSaver)
3406C DIESEL TRUCK ENGINE Governor
3406C DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406C DIESEL TRUCK ENGINE Fuel Injection Pump
3406C DIESEL TRUCK ENGINE Fuel Transfer Pump
3406C DIESEL TRUCK ENGINE Fuel Injection Nozzle And Adapter
3406C DIESEL TRUCK ENGINE Fuel Injecion Lines
3406C DIESEL TRUCK ENGINE Fuel System Identification
3406C DIESEL TRUCK ENGINE Engine Design
3406C DIESEL TRUCK ENGINE Introduction
3306C DIESEL TRUCK ENGINE Measuring Main Bearing Clearances
3306C DIESEL TRUCK ENGINE Piston Cooling Orifices
3406C DIESEL TRUCK ENGINE Ether Starting Aid
3406C DIESEL TRUCK ENGINE Fuel Ratio Control
3406C DIESEL TRUCK ENGINE Primary Fuel Filter
3406C DIESEL TRUCK ENGINE Fuel Filter Base
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (4W4619 Only)(Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE Governor And Fuel Pump Drive Group (Automatic Timing Advance Unit)
3406C DIESEL TRUCK ENGINE Auxiliary Drive Group
3406C DIESEL TRUCK ENGINE Idler Gear Shaft Pilot Bore
3406C DIESEL TRUCK ENGINE Idler Gear Assembly (For Front Gear Group)
3406C DIESEL TRUCK ENGINE Front Housing And Covers
3406C DIESEL TRUCK ENGINE Engine Front Support
3406C DIESEL TRUCK ENGINE Front (Timing) Gear Group