Bulldozer Blade (Power Angle and Tilt) - Remove and Install
Removal Procedure
- Support C-frame (1) on a wood block so that blade (2) is not setting on the ground.
Show/hide table
Illustration 1 | g00634234 |
Show/hide table
NOTICE |
---|
Be sure that the machine is on level ground. Stop the engine and move the control lever so that the weight of the C-frame is supported by the wood block. |
- Attach a lifting strap to tilt cylinder (3). Use a suitable lifting device to support the cylinder. Remove bolt (5) and the retainer.
Show/hide table
Illustration 2 | g00634235 |
- Remove pin (4) and the shims.
- Move tilt cylinder (3) aside. The weight of the cylinder is approximately 59.5 kg (131 lb).
Show/hide table
Illustration 3 | g00634236 |
- Attach a suitable lifting device to blade (2) and support the blade.
- Remove retaining bolt (5) and pin (6) .
Show/hide table
Illustration 4 | g00634237 |
- Remove bolts (7), the retaining plates, spacer blocks, and shims (8) from each side of the blade. Remove the blade. The weight of the blade is approximately 908 kg (2000 lb).
Show/hide table
Illustration 5 | g00634238 |
Installation Procedure
- The weight of the blade is approximately 908 kg (2000 lb). Attach a suitable lifting device to the blade and put the blade in position for installation.
Show/hide table
Illustration 6 | g00634238 |
- Install the spacer blocks, shims (8), the retaining plates, and bolts (7) on each side of the blade.
- Install pin (6) and retaining bolt (5) .
Show/hide table
Illustration 7 | g00634237 |
- Attach a lifting strap to tilt cylinder (3) and move the cylinder into position on blade (2). The weight of the cylinder is approximately 59.5 kg (131 lb).
Show/hide table
Illustration 8 | g00634236 |
- Install pin (4) and the shims. Install the retainer and bolt (5) .
Show/hide table
Illustration 9 | g00634235 |
- Start the engine. Raise blade (2) until the C-frame is off the wood block. Remove the wood block and lower the blade to the ground.
Show/hide table
Illustration 10 | g00634234 |
Caterpillar Information System:
527 Track-Type Skidder Machine Supplements Seat - Remove and Install
527 Track-Type Skidder Machine Supplements Cab - Install
527 Track-Type Skidder Machine Supplements Cab - Remove
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Enclosed Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Rollover Protective Structure (ROPS, Open Cab) - Remove and Install
527 Track-Type Skidder Machine Supplements Sweeps - Remove and Install
527 Track-Type Skidder Machine Supplements Receiver-Dryer - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Install
527 Track-Type Skidder Machine Supplements Refrigerant Evaporator Coil and Heater Core - Remove
527 Track-Type Skidder Machine Supplements Refrigerant Condenser Fans and Motor - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Condenser - Remove and Install
527 Track-Type Skidder Machine Supplements Refrigerant Compressor - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Blade (Power Angle) - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer Singletree - Remove and Install
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Remove
527 Track-Type Skidder Machine Supplements Bulldozer C-Frame - Install
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Remove
527 Track-Type Skidder Machine Supplements Bulldozer Lift Cylinder - Install
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Relief Valve
3176C and 3196 Engines For Caterpillar Built Machines Electronic Control Module - Remove and Install
784C and 785C Off-Highway Trucks Machine Systems Air Conditioner - Install
554 Forwarder and 574 Forwarder Articulation Bearings - Lubricate
824G Wheel Dozer, 825G Soil Compactor and 826G Landfill Compactor Hydraulic System Piston Motor (Fan Drive)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Power Train Magnetic Screen (Transmission)