Pump Mounting - Remove and Install
Removal Procedure
Start By:
- Connect the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
- Release the hydraulic system pressure. Refer to Disassembly and Assembly, SENR6768, "Hydraulic system Pressure - Release".
- Remove the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
- Remove the batteries. Refer to Disassembly and Assembly, "Batteries - Remove and Install".
- Remove the gear pump. Refer to Disassembly and Assembly, SENR6776, "Gear Pump - Remove".
- Remove the piston pump. Refer to Disassembly and Assembly, SENR6768, "Piston Pump - Remove".
Note: Put identification marks on all lines, on all hoses, on all wires and on all tubes for installation purposes. Plug all lines, all hoses and all tubes. This helps to prevent fluid loss and this helps to keep contaminants from entering the system.
- Remove twelve bolts and washer (1) from the flywheel housing.
Show/hide table
Illustration 1 | g00510246 |
- Remove adapter plate (2) from the flywheel housing.
- Remove eight bolts (3) from the nylon flange.
Show/hide table
Illustration 2 | g00510255 |
- Remove nylon flange (4) from the flywheel housing.
Installation Procedure
- Install nylon flange (4) to the flywheel housing.
Show/hide table
Illustration 3 | g00510255 |
- Install eight bolts (3) to the nylon flange. Tighten bolts to a torque of 47 ± 9 N·m (35 ± 7 lb ft).
- Install adapter plate (2) to the flywheel housing.
Show/hide table
Illustration 4 | g00510246 |
- Install twelve washer and bolts (1) to the flywheel housing. Tighten bolts to a torque of 60 ± 12 N·m (44 ± 9 lb ft).
End By:
- Install the piston pump. Refer to Disassembly and AssemblySENR6768, "Piston Pump - Install".
- Install the gear pump. Refer to Disassembly and AssemblySENR6776, "Gear Pump - Install".
- Install the batteries. Refer to Disassembly and Assembly, "Batteries - Remove and Install".
- Install the hood. Refer to Disassembly and Assembly, "Hood - Remove and Install".
- Separate the steering frame lock. Refer to Disassembly and Assembly, "Steering Frame Lock - Separate and Connect".
Caterpillar Information System:
C-10 and C-12 Industrial Engines Fuel Pressure Sensor
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Refrigerant Condenser Fans and Motor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Refrigerant Condenser - Install
784C and 785C Off-Highway Trucks Machine Systems Rear Suspension (Cylinder) - Remove
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Refrigerant Condenser - Remove
69D, 769D , 773D, 773E, 776D, 777D, 784C, 785C, 785D, 789C, 789D, 793C and 793D Off-Highway Trucks and 771D, 775D and 775E Quarry Trucks Braking System Switches
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Refrigerant Accumulator - Remove and Install
583R Pipelayer Power Train Transmission - Disassemble
583R Pipelayer Power Train Transmission - Install
3408E and 3412E Engines for Caterpillar Built Machines Speed/Timing Sensor
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Water Pump - Remove and Install
G3B, K3A and L3A Denso Alternators T8 Alternator Overcharging - Test
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Refrigerant Compressor - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Engine Supplement Air Inlet Heater - Remove and Install
3406C Engines for Caterpillar Built Machines Camshaft Bearings
3408E and 3412E Engines for Caterpillar Built Machines Pistons and Connecting Rods - Remove
836G Landfill Compactor and 834G Wheel Dozer Window Washer Reservoir - Fill
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0802 FMI 09 Interface Module (No. 2) Abnormal Update - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0803 FMI 09 Interface Module (No. 3) Abnormal Update - Test
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Steering Hydraulic System Operation
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0823 FMI 03 Lamp (Service) Voltage Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0823 FMI 05 Lamp (Service) Current Below Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0823 FMI 06 Lamp (Service) Current Above Normal - Test
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) CID 0809 FMI 02 Speedometer/Tachometer Module (No. 1) Incorrect Signal - Test