Hydraulic Tank - Install
Installation Procedure
Show/hide table
Tools Needed     | |||
Tool     | Part Number     | Part Description     | Qty     |
A     | 6V-2156     | Link Bracket     | 1     |
- Install tooling (A), a lifting strap and a hoist onto the hydraulic tank. Place the hydraulic tank into position in the machine.
Show/hide table
Illustration 1 | g00479630 |
- Install the washers and two bolts (32) that retain the sides of the hydraulic tank to the machine.
Show/hide table
Illustration 2 | g00479633 |
- Install clip (30), the washers and two bolts (29) that retain the bottom of the hydraulic tank. Install wiring assembly (31) .
Show/hide table
Illustration 3 | g00479632 |
- Install wiring assembly (28) .
Show/hide table
Illustration 4 | g00479629 |
- Install hose assemblies (21), (24), (25), (26) and (27) .
Show/hide table
Illustration 5 | g00479628 |
Note: Replace worn seals. Replace damaged seals.
- Install tube assembly (22). Tighten nut (23) .
- Install tee fitting (19). Install tube assembly (17). Tighten nuts (18) and (20) .
Show/hide table
Illustration 6 | g00479627 |
- Install clips (16). Install hose assemblies (10) and (11). Install flange assemblies (13) and (15). Install bolts (12) and (14) .
Show/hide table
Illustration 7 | g00479626 |
- Install hose assemblies (8) and (9) .
- Install clip (7). Install clamps (6), the washers and bolts (5) .
Show/hide table
Illustration 8 | g00479625 |
- Install hose (1) and clamp (2). Install tube assembly (4) and nut (3) .
Show/hide table
Illustration 9 | g00479624 |
- Fill the hydraulic tank with hydraulic oil to the correct level. Refer to the Operation and Maintenance Manual for the correct fluid type and the correct fluid quantity.
End By:
- Install the air cleaner. Refer to Disassembly and AssemblySENR6768-01, "Air Cleaner - Remove and Install".
- Install the fuel tank. Refer to Disassembly and AssemblySENR6768-01, "Fuel Tank - Install".
Caterpillar Information System:
517 Track-Type Skidder Hydraulic System Testing and Adjusting
789C Off-Highway Truck/Tractor Gear Pump (Transmission)
Electronic Modular Control Panel II (EMCP II) For MUI Engines Troubleshooting Undiagnosed Problems
Challenger 35, Challenger 45 and Challenger 55 Agricultural Tractors Implement, Steering and Brake Hydraulic Systems Three-Point Hitch Control Valve
572R Pipelayer Hydraulic System Load Sense Manifold
IT14G Integrated Toolcarrier Window Wiper - Inspect/Replace
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan Drive - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Engine Front Support - Remove
69D and 769D Off-Highway Trucks and 771D Quarry Truck Oil Cooler (Hoist and Rear Brake) - Install
69D and 769D Off-Highway Trucks and 771D Quarry Truck Oil Cooler (Hoist and Rear Brake) - Remove
3306C Engines for Caterpillar Built Machines Ether Starting Aid
572R Pipelayer Hydraulic System Combination Valves
G3B, K3A and L3A Denso Alternators Alternator - Assemble
CP-563D, CS-563D, CS-573D and CS-583D Paving Compactors Engine Air Filter Primary Element - Clean/Replace
789C Off-Highway Truck/Tractor Pressure Sensor (Rear Axle Oil Pump)
69D and 769D Off-Highway Trucks and 771D Quarry Truck Fan Drive - Disassemble
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Tire and Rim (Front) - Remove and Install
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Tank - Disassemble
5130, 5130B and 5230 Excavators, 784B, 785B, 785C, 789B, 789C, 793B and 793C Off-Highway Truck/Tractors and 992G, 994 and 994D Wheel Loaders Vital Information Management System (VIMS) General Information
IT14G Integrated Toolcarrier and 914G Wheel Loader Machine Systems Hydraulic Tank - Assemble
938G Wheel Loader and IT38G Integrated Toolcarrier Tire Inflation - Check
69D and 769D Off-Highway Trucks and 771D Quarry Truck Machine Systems Cover (Cab Front) - Remove and Install
35, 45 and 55 Agricultural Tractors Rear Axle
35, 45 and 55 Agricultural Tractors Rear Axle