Speed Sensor (Engine)
Show/hide table
Illustration 1 | g00831283 |
(1) Torque for locknut ... 25 ± 5 N·m (18 ± 4 lb ft)
Resistance at 25 °C (77 °F) ... 142 Ohms
Air gap ... 0.89 mm (0.035 inch)
Screw the speed sensor into the hole by hand until the end of the sensor barely contacts the gear tooth. Then, back out the sensor by a 1/2 turn (180 degrees in the counterclockwise direction).
Caterpillar Information System:
Caterpillar Monitoring System Component Description
572R Pipelayer Steering Clutch and Brake
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Lift Cylinder
583R Pipelayer Power Train Priority Valve
Caterpillar Monitoring System General Information
Caterpillar Monitoring System Calibration Mode
IT14G Integrated Toolcarrier Secondary Steering
IT14G Integrated Toolcarrier Parking Brake
784C and 785C Off-Highway Truck/Tractors Steering System Visual Inspection
IT14G Integrated Toolcarrier Changing Speed and Direction
IT14G Integrated Toolcarrier Machine Operation Information
583R Pipelayer Power Train Pivot Shaft
768C, 769C, 769D, 772B, 773B, 773D, 776C, 777B, 777D, 784B, 785, 785B, 789, 789B, 793, 793B and 793C Off-Highway Truck/Tractors and 771C, 771D and 775D Quarry Trucks Automatic Retarder Control (ARC) System Pressure Switch (Accelerator)
784B and 785B Off-Highway Truck Hydraulic System General Information
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Tilt Cylinder
950G and 962G Wheel Loaders and IT62G Integrated Toolcarrier Power Train Axle Housing - Disassemble
793B Off-Highway Truck Radiator Core - Clean
784B and 785B Off-Highway Truck Hydraulic System General Information
VFS50 and VFS70 Versatile Flotation System Rear Idler Support Pin - Replace
3054 Engine Engine Oil Relief Valve
3054 Engine Fuel Transfer Pump
3054 Engine Fuel Injection Nozzles
3054 Engine Fan Drive
3054 Engine Engine Oil Filter Base