Assembly of Hitch and Frame Version
Show/hide table
Illustration 1 | g00300399 |
- Attach lifting straps to frame (3). Move the frame into position so that the end of the axle goes through the left roller frame. Install the roller frame onto the pin in the center of the frame.
Show/hide table
Illustration 2 | g00300540 |
- Use retaining pin (4) and bushing (5) in order to secure the roller frame to pin (6). Pin (6) is located at the center of the frame. Secure the retaining pin with a cotter pin.
Show/hide table
Illustration 3 | g00300402 |
Bottom view of the center of the frame |
- Install wear plate (7) on pin (8) .
Show/hide table
Illustration 4 | g00300404 |
- Use four bolts (10) and four washers (11) in order to install plate (9) onto pin (8). Install bushing (12) onto pin (8) .
Show/hide table
Illustration 5 | g00300405 |
- Use two bushings (14), two pins (15), and two cotter pins (16) in order to install link (13) .
Show/hide table
Illustration 6 | g00300406 |
- Use a lift truck in order to install the right roller frame onto the axle.
Show/hide table
Illustration 7 | g00300541 |
- Repeat Step 3 through Step 6 on the right roller frame.
Caterpillar Information System:
IT14G Integrated Toolcarrier Ride Control - If Equipped
IT14G Integrated Toolcarrier Steering Column Tilt Control
IT14G Integrated Toolcarrier Steering Control
583R Pipelayer Power Train Track Roller Frame
IT14G Integrated Toolcarrier Speed Control - If Equipped
VFS50 and VFS70 Versatile Flotation System Assembly of Axle Version
IT14G Integrated Toolcarrier Direction Control
784C and 785C Off-Highway Truck/Tractors Steering System Piston Pump (Steering) Pressure - Test and Adjust - Type 1
IT14G Integrated Toolcarrier Service Brake Control
914G Wheel Loader Alternate Exit
IT14G Integrated Toolcarrier Lighter
416C, 426C, 428C, 436C and 438C Backhoe Loaders Hydraulic and Steering System Multipurpose Bucket Cylinder
784C and 785C Off-Highway Truck/Tractors Steering System Relief Valve (Steering) - Test and Adjust
784B and 785B Off-Highway Truck/Tractors Steering System Steering Accumulator - Test and Charge
IT14G Integrated Toolcarrier Hydraulic Lockout Control
3406E and 3456 Engines for Caterpillar Built Machines Compression Brake
583R Pipelayer Power Train Track Roller
IT14G Integrated Toolcarrier Bucket Kickout and Positioner Control
572R Pipelayer Power Train Oil Cooler
VFS50 and VFS70 Versatile Flotation System Installation of Scale Group
IT14G Integrated Toolcarrier Walk-Around Inspection
IT14G Integrated Toolcarrier Starting Above 0°C (32°F)
VFS50 and VFS70 Versatile Flotation System Special Torques
VFS50 and VFS70 Versatile Flotation System Belts - Inspect/Adjust/Replace