New VIMS Service Manual Available {7601}
Usage:
5130 (5ZL, 7TJ),
5130B (4CS),
5230 (7LL) Excavators;
784B (5RK) Tractor;
785B (6HK),
785C (1HW),
789B (7EK),
789C (2BW),
793B (1HL),
793C (4AR, 4GZ) Trucks;
992G (7HR),
994 (9YF),
994D (3TZ) Wheel Loaders
The latest VIMS Service Manual, SENR6059-06, "VITAL INFORMATION MANAGEMENT SYSTEM" is available.
This new revision includes:
-
- * Updated "System Operation" section.
- * Updated listing of VIMS message center abbreviations and full names.
- * Updated and expanded Failure Mode Identifiers (FMI) definitions.
- * Updated MID/CID/FMI listing to include 785C, 789C 793C and 994D.
- * Updated parameter list to include 9.6X class of onboard software parameters and their definitions.
- * Updated and expanded the "Abbreviated Troubleshooting Procedures".
- * Component Identifier (CID) test procedures have been updated. There are now individual test procedures for each CID/FMI combination. Mini circuit schematics have been included with most test procedures.
- * New 9.6X class of onboard software features (new service program code "ESET")
- * Testing and adjusting section of the manual has been reorganized to improve usability.
- * System operation section of the manual has been reorganized to improve usability.
- * Updated and expanded Truck Payload (TPS) section of the manual.
- * New troubleshooting procedures for LED lamps used on off-highway trucks.
- * Updated all VIMS machine schematics.
- * New comprehensive table of contents.
- * New comprehensive index that aids in locating information quickly.
- * A worksheet has been added to help prevent loss of stored data during an onboard software update.
- * Updated "System Operation" section.
NOTE: The VIMS Service Manual, SENR6059-05, "VITAL INFORMATION MANAGEMENT SYSTEM" was used to convert this manual to an electronic medium, which was unchanged from SENR6059-04. SENR6059-05 was never printed.
Caterpillar Information System:
1999/06/28 Actuator For Transmission Switch Can Be Service Replaced {7332}
1999/06/28 New Inlet Adapter Available For Water Pump Group {1364}
1999/06/28 New Swing Control Valve Prevents Swing Drift {5454,5480}
1999/06/28 A Special Instruction For Installing Ride Control Kits Is now Available {5004}
1999/06/28 Assembling The Transmission Thrust Bearings For Backhoe Loaders {3030}
1999/06/28 Splined Pins For Backhoe Loaders {6506,6502}
1999/06/28 New Pressure Switch Assembly For Engine Oil Improves Reliability {7455,1318}
1999/06/28 Installation Of Hydraulic Motor Case Drain Line {6129,5057,5051}
1999/06/28 Tension Cylinder Pin Now Includes Spacers {4197}
1999/06/28 Fender Mud Flaps Available {7252,4220}
1999/06/21 Methods Of Providing Feedback On Diagnostic Information {7569}
1999/06/21 Be Sure The Cylinder Head Bore For The Unit Injector Is Clean When the Unit Injector Is Replaced {1290}
1999/06/28 Dimensions For Articulated Hitches, Lift Arms, Front And Rear Levers, And Oscillating Rear Axle Assemblies Are Now Available In An Updated Special Instruction {3260,3268,6116,6118,6119,6125,6126,6127,7057,7069,7100}
1999/06/28 Hydraulic S·O·S Port Relocated {7542}
1999/06/28 Remote Forward-Neutral-Reverse Transmission Control Option Eases Operation {5705,3065}
1999/06/28 Improved Fenders Increase Service Life {7252}
1999/06/28 Revised CD-ROM For Hydraulic Electronic Unit Injector (HEUI) Fuel System Available {0350}
1999/06/28 Special Instruction, REHS0494, "Accessing Flash Software For Machines", Is Now Available {7620}
1999/07/05 Improved Drawbar/Three-Point Hitch Increases Durability {7120}
1999/07/05 New Lifting Capacity Warning Film Now Available {7405}
1999/07/05 Improved Sun Gear Available For Off-Highway Trucks And Tractors {4050,4055}
1999/07/05 New Clutch Discs With Improved Core Material Now Available For Large Off-Highway Trucks {3187,3030}
1999/07/05 Incorrect End Float For Limited Slip Differentials {3258}
1999/07/05 Troubleshooting The Gear Position Sensor On Individual Clutch Modulation Transmissions {3168}