Orifice Plate Can Be Removed From 8X-0234 Oil Cooler Lines Group In 793 And 793B Off-Highway Trucks{4257,1365}
Usage:
793 (3SJ),
793B (1HL) Off-Highway Trucks
Description of Change: Orifice plate was originally installed to provide balanced flow, compensating for hose length differences. It has been determined that an orifice is not required to maintain balanced flow.
Adaptable To: The 8X-8194 Plate (1) in the 8X-0234 Oil Cooler Lines Group (not serviced) can be removed in all 793 (3SJ) and 793B (1HL) Off-Highway Trucks.
Caterpillar Information System:
1997/10/06 Resistor Harness Reduces Fan's Speed Sensor Faults{1408,1356,1350,1000}
1997/10/06 New Special Edition Is Available For 768C, 772B, 776C, and 776D Tractors; 771C, 771D, And 775D Quarry Trucks; 769C, 769D, 773B, 773D, 777C, And 777D Off-Highway Trucks{0374}
1997/10/06 New Special Edition Is Available For 784B Tractor; 785B, 789, 789B, 793, 793B, and 793C Off-Highway Trucks{0374}
1997/10/06 Improvements Made To H-Series Motor Graders{7475,1408,1429,3073,7304,7309,7450,7451}
1997/10/06 New Differential Lock/Unlock Indicator Light Now Used With H-Series Update{7450,3264,3270}
1997/10/06 New Cab Positioning Procedure For 24H Motor Graders{7301}
1997/10/06 Rotated Cylinder Cap Changes Location Of Hydraulic Line To Protect Line On Blade Lift Cylinder Group{5057,5102}
1997/10/06 Shaft Seal Leaking In Implement Pump Groups{5070}
1997/10/06 New 100 Amp Alternator Now Available{1405}
1997/10/06 New Fan Drive Absorber Increases Service Life{1358}
1997/10/06 New Cab Mount Reduces Vibration{1710}
1997/10/06 Higher Capacity Fan Belts Now Used{1350,1356,1359}
1997/10/06 New End Covers Eliminate Seal Spacer Plates For Steering Control Valve Group{4307}
1997/10/06 Adjustment Procedures Formerly Found Only In Specification Service Manual Modules Have Been Added To Testing And Adjusting Service Manual Modules{0374,0375}
1997/10/06 Do Not Install 16 Ply, 20 Ply, Or L-5 Tires On Single Piece Rim Assemblies{4202,4209}
1997/10/06 Fuel Level Senders Improved To Prevent Open Circuit Conditions{7481}
1997/10/06 New Films Used With Caterpillar Monitoring System{7490}
1997/10/06 Service Charts And Decals Available{0374,0375}
1997/10/06 Proper Welding Procedure On Machines And Engines With Electronic Controls{1400}
1997/10/13 Improved Transmission Oil Dipstick Tube Assembly And Bracket Used{3081}
1997/10/13 Improved Conditioner Condensation Drains{1808,7257,7320,7343}
1997/10/13 Improved Seat Shock Absorber And Arm Assembly Is Available{7324}
1997/10/13 Improved Films And Plates Are Attached With Fasteners{7405}
1997/10/13 Possible Downloading Problem When Truck Payload Measurement V8.0 Is Used With Windows '95{7494}