Fuel Shutoff Solenoid
Usage:
Remove Fuel Shutoff Solenoid
1. Disconnect the two wires for the solenoid.
2. Remove two nuts (1) and slide the bolts toward rear of engine.
3. Remove solenoid (2), spring (3) and plunger (4).
4. Remove the nut and shaft from plunger.
Install Fuel Shutoff Solenoid
1. Install nut (1) and shaft (2) into the plunger. For the correct adjustment for the shaft, see the Specifications Section.
2. Install plunger (4) so shaft (5) is under the lever in the governor housing. Install spring (3) and the solenoid.
3. Install the two nuts on the bolts.
4. Connect the two wires.
Caterpillar Information System:
3406 DIESEL TRUCK ENGINE Fuel Ratio Control
3406 DIESEL TRUCK ENGINE Automatic Timing Advance
3406 DIESEL TRUCK ENGINE Fuel Transfer Pump (Later)
3406 DIESEL TRUCK ENGINE Fuel Transfer Pump
3406 DIESEL TRUCK ENGINE Fuel Filter Base
3406 DIESEL TRUCK ENGINE Fuel Priming Pump
3406 DIESEL TRUCK ENGINE Tachometer Drive
3406 DIESEL TRUCK ENGINE Accessory Drive
3406 DIESEL TRUCK ENGINE Electric Starting Motor
3406 DIESEL TRUCK ENGINE Air Compressor
3406 DIESEL TRUCK ENGINE Air Compressor Governor
3406 DIESEL TRUCK ENGINE Fuel Injection Lines
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor (Earlier)
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor (Earlier And Later)
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing And Governor
3406 DIESEL TRUCK ENGINE Governor
3406 DIESEL TRUCK ENGINE Fuel Injection Pump Housing
3406 DIESEL TRUCK ENGINE Fuel Injection Pump And Governor Drive
3406 DIESEL TRUCK ENGINE Inlet Manifold
3406 DIESEL TRUCK ENGINE Aftercooler Housing
3406 DIESEL TRUCK ENGINE Aftercooler Core
3406 DIESEL TRUCK ENGINE Turbocharger
3406 DIESEL TRUCK ENGINE Turbocharger (Airesearch T12)
3406 DIESEL TRUCK ENGINE Turbocharger (Schwitzer F552)