Usage:
SEBF8390-01
June 2000
SMCS Code: 0661
SHOP REVIEW
Hardware Containers
Summary of Revisions |
|
Page |
Description |
All |
Revised format. |
Introduction
This Guideline enables dealers and their customers to benefit from cost reductions made possible through an established parts reusability and salvage program. Every effort has been made to provide the most current and relevant information known to Caterpillar Inc. Since the Company makes ongoing changes and improvements to its products, this Guideline must be used with the latest technical information available from Caterpillar to ensure such changes and improvements are incorporated where applicable.
For questions or additional information concerning this Guideline, contact Caterpillar Service Support Division, Dealer Support (309) 675-5156.
Summary
The following pages contain visual examples of dealer manufactured products used to improve efficiency of specialization shops. These containers are currently being used by dealers to clean, inspect and store hardware.
Caterpillar does not recommend any one design, but each design should be compatible with the methods and cleaning equipment available at the dealership.
When designing any hardware container, remember to consider damage to the parts as one of the most important factors. Containers that allow parts to come into contact with each other may cause significant part damage.
Note: Inspect containers, lifting devices and all other related equipment for damage and repair per manufacturer?s recommendations before use.
Hardware Containers
Illustration 1
Bolt Bin.
Illustration 2
Bolt bin.
|
Illustration 3
Typical small parts container that can be used in a high pressure system.
Illustration 4
Small parts cleaning baskets.
Illustration 5
Bolt and small parts basket.
Illustration 6
Bolt bin.
Bolt bin.
Illustration 8
Miscellaneous parts bin that can be stacked and used in cabinet washer.