Usage:
1. Drain the oil from the hydraulic tank.
2. Disconnect two oil lines (4) from the bottom of the tank (1).
3. Remove four bolts (8) that hold the flange (7) to the hydraulic tank.
4. Remove two bolts from the top of the hydraulic tank. Install two 6V2156 Link Brackets (A).
5. Disconnect two wires (6) at tank (1).
6. Fasten a hoist to the link brackets.
7. Remove bolts (2) and the washers that hold the support (5) to tank (1).
8. Remove bolts (3) that hold the support (5) to the bracket.
9. Remove hydraulic tank (1). Weight is 200 lb. (90 kg).
NOTE: The following steps are for installation of the hydraulic tank.
10. Put hydraulic tank (1) in position on the machine.
11. Install bolts (3) that hold the bracket to support (5).
12. Install bolts (2) that hold hydraulic tank (1) to support (5).
13. Install the bolts (8) that hold flange (7) to the hydraulic tank (1).
14. Connect two oil lines (4) to their correct locations on the hydraulic tank (1).
15. Remove the hoist and the link brackets (A). Install the two bolts in the top of the hydraulic tank.
16. Install two wires (6) to tank.
17. Fill the hydraulic tank with oil to its correct level. See the Operation and Maintenance Manual.