C. Attachment Parts
Usage:
Safety regulations
Show/hide table
General advice
|
Please observe the guidelines of the Professional association and the machine manufacturer.
Repair Instructions
Before starting
- * Observe operating instructions before starting.
- * Check the machine for remarkable faults.
- * Do not operate the machine with defective instruments, warning lights or control elements.
- * All safety devices must be in a secure position.
- * Do not carry with you movable objects or secure them to the machine.
- * Keep oily and inflammable material away from the machine.
- * Before entering the driver's cabin, check if persons or obstacles are beside or beneath the machine.
- * Be careful when entering the driver's cabin, use stairs and handles.
- * Adjust your seat before starting.
- * Check the machine for remarkable faults.
Start
- * When starting all operating levers must be in "neutral position".
- * Only start the machine from the driver's seat.
- * Check the indicating instruments after start to assure that all functions are in order.
- * Do not leave the machine unobserved when the motor is running.
- * When starting with battery cables connect plus with plus and minus with minus. Always connect mass cable (minus) at last and cut off at first.
- * Only start the machine from the driver's seat.
Attention
* Exhaust gas is dangerous. Assure sufficient fresh air when starting in closed rooms!
Hydraulic equipment
- 1. Hydraulic equipment is standing under high pressure.
High pressure fluids (fuel, hydraulic oil) which escape under high pressure can penetrate the skin and cause heavy injuries. Therefore immediately consult a doctor as otherwise heavy infections can be caused.- 2. When searching leakages use appropriate auxiliary devices because of the danger of accidents.
- 3. Before working at the hydraulic equipment, lower pressure to zero and lower working arms of the machine.
- 4. When working at the hydraulic equipment, absolutely stop motor and secure tractor against rolling away (parking brake, shim)!
- 5. When connecting hydraulic cylinders and motor pay attention to correct connection of hydraulic flexible hoses.
- 6. In case of exchanging the ports, the functions are vice versa (f. ex. lift-up/lower) - danger of accidents!
- 7. Check hydraulic flexible hoses regularly and replace them in case of damage or wear! The new hose pipes must comply with the technical requirements of the machine manufacturer!
- 2. When searching leakages use appropriate auxiliary devices because of the danger of accidents.
Orderly disposal or recycling of oil, fuel and filters!
Caterpillar Information System:
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 B. Lube Oils
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 Addresses
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 10. Spare Parts Ordering
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 8 Dismantling
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 7. Maintenance
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 5. Commissioning
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 4. Mounting
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 3. Handling / Storage
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 2. Product Description
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 1. Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT L + S GFT 060T3.9177 with Disconnect
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN + STOLTERFOHT Parts Lists
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 Installation Notes for Axial Piston Units
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 D. Drawings
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 E. Parts Lists
1C7993 PROPEL DRIVES-UNDERCARRIAGES 9Q5718 9Q5723 9Q5724 9Q5 L + S GFT 060T3.9224
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 1. Preliminary Notes
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 2. Product Description
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 3. Handling / Storage
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 4. Mounting
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 5. Commissioning
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 7. Maintenance
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 8 Dismantling
SUPPLEMENTARY SERVICE INFORMATION FOR LOHMANN & STOLTERFOHT 10. Spare Parts Ordering