PRODUCT SUPPORT PROGRAM FOR INSTALLING A CLIP TO SECURE THE 208-1512 TUBE ASSEBMLY ON CERTAIN 12H AND 140H MOTOR GRADERS
Usage:
SEBE9613
July 17, 2006
D-132
Show/hide table
| before
or after failure |
PRODUCT SUPPORT PROGRAM FOR INSTALLING A CLIP TO SECURE THE 2081512/">208-1512 TUBE ASSEBMLY ON CERTAIN 12H AND 140H MOTOR GRADERS |
|
| 4285 |
PS42022
|
|
NOTE: The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Termination Date
July 31, 2008PROBLEM
The 2081512/">208-1512 Tube Assembly on certain 12H and 140H Motor Graders may be rubbing on surrounding components or sheetmetal if the clip that secures it is missing. This rubbing can result in failure of the tube.AFFECTED PRODUCT
Show/hide table
| Model | Identification Number |
| 12H | 12500001-112 |
| 140H | 12600001-187 |
PARTS NEEDED
Show/hide table
|
|
|
|
|
|
|
CLIP-LOOP |
|
|
|
WASHER-HARD |
|
|
|
BOLT |
|
|
|
TUBE AS. |
| * Replace if damaged or worn. | ||
ACTION REQUIRED
See the attached procedure.SERVICE CLAIM ALLOWANCES
Show/hide table
|
|
|
|
|
|||
|
|
|
|
|
|
|
|
|
0-24 Months |
|
|
|
|
|
|
|
|
||||||
PARTS DISPOSITION
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.Attach. (1- Rework Procedure)
REWORK PROCEDURE
Inspect the 2081512/">208-1512 Tube Assembly to make sure there is no damage or wear from rubbing on components or sheet metal.
If damage or wear is present replace the tube assembly.
Install a 6K8178 Clip, 8T4121 Washer and 8T4137
Bolt to secure the tube assembly
Illustration 1 - Location of Tube Assembly
Illustration 2 - Tube Assembly Contacting Sheet Metal
Illustration 3 - Orientation of Clamp
Illustration 4 - Air Dryer Group
Install Items 15, 21, and 22 to secure Tube 10.
Caterpillar Information System:
PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW COOLANT BYPASS HOSE, NEW WATER PUMP AND THERMOSTAT HOUSING ALONG WITH A NEW OIL SUCTION PICK UP PIPE ; STRAINER ON CERTAIN 226B, 242B, 247B, AND 257B SKID STEER LOADERS PRODUCT SUPPORT PROGRAM FOR INSTALLING A NEW COOLANT BYPASS HOSE, NEW WATER PUMP AND THERMOSTAT HOUSING ALONG WITH A NEW OIL SUCTION PICK UP PIPE & STRAINER ON CERTAIN 226B, 242B, 247B, AND 257B SKID STEER LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE REAR PROPEL CASE DRAIN LINES ON CERTAIN RM-350B ROAD RECLAIMERS PRODUCT IMPROVEMENT PROGRAM FOR REROUTING THE REAR PROPEL CASE DRAIN LINES ON CERTAIN RM-350B ROAD RECLAIMERS
PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE AND CHASSIS SOFTWARE, INSPECTING THE FRONT A-FRAME LOWER HITCH PIN, AND REWORKING THE TRANSMISSION GEAR SWITCH HARNESS RETAINER ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REFLASHING ENGINE AND CHASSIS SOFTWARE, INSPECTING THE FRONT A-FRAME LOWER HITCH PIN, AND REWORKING THE TRANSMISSION GEAR SWITCH HARNESS RETAINER ON CERTAIN 725, 730, 735, 740, AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SERVICE BRAKE DISCS AND HOUSINGS ON CERTAIN 416D, 420D, 420DV, 420D IT, 424D, 428D, 430D, 430D IT,432D, 438D, AND 442D BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REPAIRING THE HYDRAULIC TANK ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T, 1290T, AND 1390 TRACK FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR REPAIRING THE HYDRAULIC TANK ON CERTAIN TK711, TK721, TK722, TK732, 1090, 1190, 1190T, 1290T, AND 1390 TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE PISTON PUMP (IMPLEMENT, PILOT) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR INSPECTING AND REWORKING THE PISTON PUMP (IMPLEMENT, PILOT) ON CERTAIN 950H, 962H, 966H, 972H WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE DAMPER ADAPTOR BOLTS ON CERTAIN 3408, 3408C, 3408E, 3412, 3412C, 3412D, 3412E, C27, C32 ENGINES 773E OFF HIGHWAY TRUCKS, AND D10T, D9R TRACK TYPE TRACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AUXILIARY PUMP ON CERTAIN PM-200 COLD PLANERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE AUXILIARY PUMP ON CERTAIN PM-200 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM AND THE PROPEL PUMP EDC ON CERTAIN CB-434D ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE MACHINE ECM AND THE PROPEL PUMP EDC ON CERTAIN CB-434D ASPHALT COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING LINK GROUP ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE STEERING LINK GROUP ON CERTAIN 797 AND 797B OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEALS ON THE CAB ON CERTAIN 320C, 322C, 325C, 330C FORESTRY EXCAVATORS AND TK711, TK721, TK722, TK732, TK741, 1190, AND 1190T TRACK FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE SEALS ON THE CAB ON CERTAIN 320C, 322C, 325C, 330C FORESTRY EXCAVATORS AND TK711, TK721, TK722, TK732, TK741, 1190, AND 1190T TRACK FELLER BUNCHERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO OIL LINE ON CERTAIN 226B, 242B, 247B, AND 257B SKID STEER LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBO OIL LINE ON CERTAIN 226B, 242B, 247B, AND 257B SKID STEER LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE JOYSTICK CONTROL GROUPS ON CERTAIN TK711, TK721, TK722, TK732, TK741, AND TK752 TRACK FELLER BUNCHERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE JOYSTICK CONTROL GROUPS ON CERTAIN TK711, TK721, TK722, TK732, TK741, AND TK752 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLT THAT HOLDS THE PISTON IN THE STEERING CYLINDER OF CERTAIN CB-224E AND CB-214E ASPHALT COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR TIGHTENING THE BOLT THAT HOLDS THE PISTON IN THE STEERING CYLINDER OF CERTAIN CB-224E AND CB-214E ASPHALT COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3044C CYLINDER BLOCK CUP PLUG ON CERTAIN 236B, 246B, 248B, 252B, 262B, 267B, 268B, 277B, 287B SKID STEER LOADERS, 906 and 908 COMPACT WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING 3044C CYLINDER BLOCK CUP PLUG ON CERTAIN 236B, 246B, 248B, 252B, 262B, 267B, 268B, 277B, 287B SKID STEER LOADERS, 906 and 908 COMPACT WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OPERATOR DISPLAY MODULE ON CERTAIN RM-300 AND RM-500 ROAD RECLAIMERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OPERATOR DISPLAY MODULE ON CERTAIN RM-300 AND RM-500 ROAD RECLAIMERS
PRODUCT IMPROVEMENT PROGRAM FOR TESTING THE FAN / BRAKE PUMP OPERATION AND REPLACING THE IDLER GEAR ASSEMBLY ON 3056E ENGINES INSTALLED IN CERTAIN IT28G EWF PREFIX MACHINES PRODUCT IMPROVEMENT PROGRAM FOR TESTING THE FAN / BRAKE PUMP OPERATION AND REPLACING THE IDLER GEAR ASSEMBLY ON 3056E ENGINES INSTALLED IN CERTAIN IT28G EWF PREFIX MACHINES
PRODUCT SUPPORT PROGRAM FOR ADDING A DEDICATED RETURN LINE FOR IMPROVED STEERING BLADDER ACCUMULATOR PURGE AT ENGINE OFF ON CERTAIN 797 AND 797B OFF HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR ADDING A DEDICATED RETURN LINE FOR IMPROVED STEERING BLADDER ACCUMULATOR PURGE AT ENGINE OFF ON CERTAIN 797 AND 797B OFF HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL, TESTING THE FAN / BRAKE PUMP OPERATION AND IF NECESSARY, REPLACING THE IDLER GEAR ASSEMBLY ON 3056E ENGINES INSTALLED IN CERTAIN 924G, 928G, AND IT28G MACHINES PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL, TESTING THE FAN / BRAKE PUMP OPERATION AND IF NECESSARY, REPLACING THE IDLER GEAR ASSEMBLY ON 3056E ENGINES INSTALLED IN CERTAIN 924G, 928G, AND IT28G MACHINES
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN D SERIES BACKHOE LOADERS, 914G, AND IT14G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN D SERIES BACKHOE LOADERS, 914G, AND IT14G WHEEL LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN CB-434D, CB-534D, CP-433E, CP-323C, CS-323C, CS-423E, CS-433E, CS-533E COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054C ENGINES INSTALLED IN CERTAIN CB-434D, CB-534D, CP-433E, CP-323C, CS-323C, CS-423E, CS-433E, CS-533E COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054E ENGINES INSTALLED IN CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, AND TH560B TELEHANDLERS PRODUCT IMPROVEMENT PROGRAM FOR SAMPLING THE ENGINE OIL AND IF NECESSARY REPLACING THE IDLER GEAR ASSEMBLY ON 3054E ENGINES INSTALLED IN CERTAIN TH220B, TH330B, TH340B, TH350B, TH355B, TH360B, TH460B, AND TH560B TELEHANDLERS
PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING A PRE-DELIVERY INSPECTION ON CERTAIN SKID STEER LOADERS AND MULTI TERRAIN LOADERS PRODUCT IMPROVEMENT PROGRAM FOR PERFORMING A PRE-DELIVERY INSPECTION ON CERTAIN SKID STEER LOADERS AND MULTI TERRAIN LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 223-0043 (IQAN, XP MODULE) AND 202-5420 (IQAN, XT MODULE) MACHINE ELECTRONIC CONTROL MODULES ON CERTAIN 1090, 1190, 1190T, 1290T, 1390, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHER PRODUCT SUPPORT PROGRAM FOR REPLACING THE 223-0043 (IQAN, XP MODULE) AND 202-5420 (IQAN, XT MODULE) MACHINE ELECTRONIC CONTROL MODULES ON CERTAIN 1090, 1190, 1190T, 1290T, 1390, TK711, TK721, TK722, TK732, TK741, TK751, AND TK752 TRACK FELLER BUNCHER