PSP FOR INSTALLING A NEW GOVERNOR DRIVE GEAR ON CERTAIN E110B, E120B, E200B,EL200B,213B,214B,224B,E240B,EL240B EXCAVATORS; CB-434 COMPACTORS; 446 BACKHOE LOADERS; CP-563, CS-563 COMPACTORS; AP-1050 PAVERS; 3114, 3116 ENGINES (COMMERCIAL) - PS4449 -
Usage:
@media screen {
div.divFooter {
display: none;
}
}
@media print {
div.divFooter {
position: fixed;
bottom: 0;
right: 0;
}
}
PSP FOR INSTALLING A NEW GOVERNOR DRIVE GEAR ON CERTAIN E110B, E120B, E200B,EL200B,213B,214B,224B,E240B,EL240B EXCAVATORS; CB-434 COMPACTORS; 446 BACKHOE LOADERS; CP-563, CS-563 COMPACTORS; AP-1050 PAVERS; 3114, 3116 ENGINES (COMMERCIAL) - PS4449 - MAILED US AND, CANADA, CACO, COFA, CFEL, COSA
NOTE:   The information supplied in this service letter may not be valid after the termination date of this program.   Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
U-76 A-45 AU-48 E-49 O-62 1288 PS4449 NOTE: This Program can be administered either before or after a failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS4449" as Part Number, "7755" as Group Number, and "96" as Description Code. NOTE: Although this Program is to be administered as described above on the Affected Product, parts should be removed from parts stock as soon as possible. If possible, it is recommended that this Program be implemented on the Affected Product at the same time as the October 30, 1989 Service Letter - PS4359.
Termination Date
April 30, 1992
Problem
Governor drive gear on certain E110B, E120B, E200B, EL200B, 213B, 214B, 224B, E240B, and EL240B Excavators; CB434 Compactors; 446 Backhoe Loaders; CP563 and CS563 Compactors; AP1050 Pavers; and 3114 and 3116 Engines (Commercial) may not have the proper profile. An improper profile can result in wear of the camshaft gear.
Affected Product
Model Identification Number E110B 8MF1-139 E120B 6JF1-1-151, 154 E200B 6KF1-348 6KG1-123 EL200B 7DF1-843 213B 1EJ1-228 214B 4CF1-268 9MF1-189 224B 7WF1-46, 49, 56 E240B 9PF1-130 EL240B 6MG1-70 CB434 3TF1-51 446 6XF1-252 CP563 1YJ1-59 CS563 8XF1-49 AP1050 1JG1-52 3114 5EF1-673 * 6AF1-580 5JG1-742 3116 * 2SG1-934 2WG1-859 4PG1-611 1NJ1-998 * Affected Product with these Product Identification Numbers are Standby Generator Sets which do not require the update described in this Program. However, if they are being operated as Prime Power Generator Sets instead of standby application, the new governor drive gear is recommended.
Parts Needed
1-7E0844 Seal (Cylinder head to the governor connecting tube) 1-1T1068 Seal (Governor Installation) 1-9Y0273 Gear Assembly
Action Required
***** Parts Stock ***** Part 1 Check all 9Y0273 Gear Assemblies in parts stock for "Blue Dye" stripes on the side surface of the gears. Remove all 9Y0273 Gear Assemblies from parts stock that are not marked with these blue dye stripes on the side surface of the gears. Part 2 See the attached rework procedure for reworking governor groups in parts stock. ***** Affected Product ***** See the attached rework procedure.
Service Claim Allowances
***** Parts Stock ***** Submit one claim for all 9Y0273 Gear Assemblies removed from parts stock. Product Caterpillar Dealer Suggested Customer Suggested smu/age Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs. (D/N) (Cost) (C/L) (Sell) All 100% .5 0 0 0 0 NOTE: This is a .5 hour job to rework governor assemblies in parts stock. ***** Affected Product ***** Product Caterpillar Dealer Suggested Customer Suggested smu/age Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs. whichever (D/N) (Cost) (C/L) (Sell) comes first E110B, E120B, E200B, EL200B, 213B, 214B, 224B, E240B, and EL240B Excavators; CB434 Compactors; 446 Backhoe Loaders; CP563 and CS563 Compactors; AP1050 Pavers; and 3114 and 3116 Engines (Except 3114 and 3116 Industrial And Marine Engines). 0-3000 100% 1 0 1 0 0 0-24 mo 3001-5000 33 1/3% .5 0 .5 0 1 25-36 mo NOTE: This is a 2-hour job. Product Caterpillar Dealer Suggested Customer Suggested smu/age Parts Labor Hrs. Parts Labor Hrs. Parts Labor Hrs. whichever (C/L) (Sell) (C/L) (Sell) comes first ***** 3114 and 3116 Industrial And Marine Engines ***** 0-3000 100% 1 0 1 0 0 0-24 mo 3001-5000 33 1/3% .5 0 .5 0 1 25-36 mo NOTE: This is a 2-hour job.
Parts Disposition
***** All Dealers Except COSA Dealers ***** Any parts removed (with the exception of cores used for Caterpillar Remanufactured parts) can be rendered useless and scrapped immediately upon completion of the repair. ***** COSA Dealers Only ***** Handle the parts in accordance with the Warranty Bulletin No. 8.9 on warranty parts handling. Rework Procedure ***** Parts Stock ***** Inspection Of Governor Groups In Parts Stock 1. Check governor serial number plates on all of the following Governor Groups in parts stock. 7C4176, 7C6562, 7C8593, 7E0001, 7E0002, 7W5557, 7W8178, 9Y0178, 9Y1094, 9Y2675, 9Y2678, 9Y3833, 9Y4025, 9Y4148, 9Y7899 2. Replace 9Y0273 Gear Assemblies of the affected governor groups in parts stock, with the new 9Y0273 marked with "Blue Dye" stripes. Any of the governor assemblies with Serial Numbers up to 0009102 which do not have "RG" marks in the "LOT" columns on the governor serial number plates need to be updated. NOTE: Governor Serial Number Early governors had serial numbers in which the first four numbers denote the month and year of the governor's manufacture. Example: 038800025 Any of the early governors without "RG" marks on the governor serial number plates need to be updated. Later governors use an increasing sequence numbering system, using zeros at the beginning. Example: 0006750. NOTE: Identification mark in the "LOT" column. Governors with "RG" marks in the governor serial number plate have good gears. ****** IMAGE: SEBE4278.00001.001 CAPTION: Illustration 1 - Governor Serial Number Plate 3. See the procedure for reworking both parts stock governors and affected product. ***** Affected Product ***** Inspection Procedure For Affected Product The governor serial number and the identification mark in the "LOT" column on the Governor Serial Number Plate, must be used to determine whether to replace the 9Y0273 Gear Assemblies. 1. Check governor serial number plates for the Governor Serial Numbers and Identification Marks. 2. Replace 9Y0273 Gear Assemblies with new 9Y0273 marked with "Blue Dye" stripes, on certain products as follows. Any of the governor assemblies with Governor Serial Numbers up to 0009102 which do not have either "RG' OR "R" marks in the "LOT" columns on the governor serial number plates, need to be updated. NOTE: All factory reworked governors have "RG" marks while some engines with 1CK and 2ZF serial number prefixes have "R" marks on them. ****** IMAGE: SEBE4278.00001.002 CAPTION: Illustration 2 - Governor Serial Number Plate 3. See the procedure for reworking both parts stock governors and affected product. Procedure For Reworking Both Parts Stock Governors And Affected Product NOTE: Only Steps No. 3 and 4 are required for parts stock governors. 1. Measure and record the original fuel setting. 2. Remove the governor from the engine. 3. Replace the affected 9Y0273 Gear Assembly. Torque the governor drive gear retaining bolt to 25 +- 7 N.m (18 +- .5 lb ft). NOTE: Assemble with short length, 8.43 mm (.332 in) of dowel pin in gear assembly, face down (toward housing). Be sure gear rotates freely on carrier bore. Be careful not to damage the "C" spring, by over compressing with the vise. 4. Stamp "RG" mark in the "LOT" column on the reworked governor's serial number plate. 5. Remove 9Y5925 Tube from the cylinder head and replace the wiper seal with new 7E0844 Seal. And also replace 1T1068 Seal with new one. ****** IMAGE: SEBE4278.00001.003 CAPTION: Illustration 3 - Location of Parts 6. Install the updated governor on the engine. 7. Adjust the fuel setting to the original setting recorded in Step 1. NOTE: The above rework should be done in accordance with the procedures shown in service manual (Disassembly and Assembly Form No. SENR3611-02 and Systems Operation/Testing and Adjusting Form No. SENR3583-02)
Service Claim Allowances
Product Caterpillar Dealer Suggested Customer Suggested smu/age Parts Labor Hrs Parts Labor Hrs Parts Labor Hrs (D/N) (Cost) (C/L) (Sell) NOTE: This is a 2-hour job for the affected products, and 0.5 hour job for the affected governor groups in the parts stock. Repairs performed on 3114/3116 Industrial and Marine Engines will be reimbursed for parts at C/L and labor at sell.
Caterpillar Information System:
PSP FOR REPLACING FAILED CYLINDER HEAD GASKETS ON CERTAIN 3406B TRUCK ENGINES - PS0450 - MAILED US AND CANADA, COFA, CFE L, TRUCK TEPS, LIMITED COSA PSP FOR REPLACING FAILED CYLINDER HEAD GASKETS ON CERTAIN 3406B TRUCK ENGINES - PS0450 - MAILED US AND CANADA, COFA, CFE L, TRUCK TEPS, LIMITED COSA
PSP FOR INSTALLING NEW WATERCOOLED EXHAUST MANIFOLDS ON CERTAIN 3508, 3512, AND 3516 MARINE ENGINES - PS0415 - MAILED US AND CANADA, CACO, COFA, CFEL, COSA, MARINE TEPS PSP FOR INSTALLING NEW WATERCOOLED EXHAUST MANIFOLDS ON CERTAIN 3508, 3512, AND 3516 MARINE ENGINES - PS0415 - MAILED US AND CANADA, CACO, COFA, CFEL, COSA, MARINE TEPS
PSP FOR INSTALLING A NEW FUEL SHUTOFF SOLENOID ON CERTAIN 3116 ENGINES USED IN CHEVROLET KODIAK AND GMC TOPKICK TRUCKS - PS4 441 - MAILED US AND CANADA, LIMITED TRUCK TEPS PSP FOR INSTALLING A NEW FUEL SHUTOFF SOLENOID ON CERTAIN 3116 ENGINES USED IN CHEVROLET KODIAK AND GMC TOPKICK TRUCKS - PS4 441 - MAILED US AND CANADA, LIMITED TRUCK TEPS
SERVICE LETTER EXTENSION FOR OCTOBER 5, 1988 SL - PS4260 PSP FOR WIRE ABRASION AND/OR WATER IN THE AIR RATIO LINES GROUP BOO ST LINE ON CERTAIN 3406B ENGINES EQUIPPED WITH PROGRAMMABLE ELECTRONIC ENGINE CONTROL (PEEC) - MAILED US AND CANADA, TRUCK TE SERVICE LETTER EXTENSION FOR OCTOBER 5, 1988 SL - PS4260 PSP FOR WIRE ABRASION AND/OR WATER IN THE AIR RATIO LINES GROUP BOO ST LINE ON CERTAIN 3406B ENGINES EQUIPPED WITH PROGRAMMABLE ELECTRONIC ENGINE CONTROL (PEEC) - MAILED US AND CANADA, TRUCK TE
SERVICE LETTER EXTENSION FOR APRIL 11, 1987 SL - PS0309 - PSP FOR CAMSHAFT FAILURES; 3406B TRUCK ENGINES - MAILED US AND CAN ADA, TRUCK TEPS SERVICE LETTER EXTENSION FOR APRIL 11, 1987 SL - PS0309 - PSP FOR CAMSHAFT FAILURES; 3406B TRUCK ENGINES - MAILED US AND CAN ADA, TRUCK TEPS
NOTIFICATION OF JACOBS REWORK PROGRAM FOR CERTAIN JACOBS MODEL C317 CONTROL MODULES USED ON 3176 ENGINES - MAILED US AND CAN ADA, LIMITED TRUCK TEPS NOTIFICATION OF JACOBS REWORK PROGRAM FOR CERTAIN JACOBS MODEL C317 CONTROL MODULES USED ON 3176 ENGINES - MAILED US AND CAN ADA, LIMITED TRUCK TEPS
PSP FOR INSTALLING DETONATION SENSITIVE TIMING CONTROLS ON CERTAIN 3512 AND 3516 SI ENGINES - PS4400 - MAILED US AND CAN ADA, CACO, COSA PSP FOR INSTALLING DETONATION SENSITIVE TIMING CONTROLS ON CERTAIN 3512 AND 3516 SI ENGINES - PS4400 - MAILED US AND CAN ADA, CACO, COSA
PARTS STOCK ACTION ONLY - 9W9789 SEGMENTS IN PARTS STOCK NEED TO BE INSPECTED FOR MISSING CHAMFER - PI7229 - MAILED US AND CAN ADA, CACO, COFA, BRAZIL, CFEL, COSA PARTS STOCK ACTION ONLY - 9W9789 SEGMENTS IN PARTS STOCK NEED TO BE INSPECTED FOR MISSING CHAMFER - PI7229 - MAILED US AND CAN ADA, CACO, COFA, BRAZIL, CFEL, COSA
PRIORITY - THE CRANKSHAFT NEEDS TO BE INSPECTED AND REPLACED IF NECESSARY IN CERTAIN 3516 MARINE, GENERATOR SET, INDUSTRIAL SPA RK IGNITED, AND LOCOMOTIVE ENGINES; AND 789 TRUCKS - PI3429 - MAILED US AND CANADA, CACO, COFA, LIMITED CFEL, LIMITED COSA PRIORITY - THE CRANKSHAFT NEEDS TO BE INSPECTED AND REPLACED IF NECESSARY IN CERTAIN 3516 MARINE, GENERATOR SET, INDUSTRIAL SPA RK IGNITED, AND LOCOMOTIVE ENGINES; AND 789 TRUCKS - PI3429 - MAILED US AND CANADA, CACO, COFA, LIMITED CFEL, LIMITED COSA
PARTS STOCK ACTION ONLY - NEW CYLINDER HEAD GASKETS USED ON 3408 AND 3412 ENGINES - PI7228 - MAILED US AND CANADA, CACO, COF A, BRAZIL, CFEL, COSA, MARINE TEPS PARTS STOCK ACTION ONLY - NEW CYLINDER HEAD GASKETS USED ON 3408 AND 3412 ENGINES - PI7228 - MAILED US AND CANADA, CACO, COF A, BRAZIL, CFEL, COSA, MARINE TEPS
PSP FOR CRANKSHAFTS IN CERTAIN D10 TRACTORS, D348 ENGINES, 776 TRACTORS, 777 TRUCKS, AND 992 LOADERS - PS0428 - MAILED US AND CAN ADA, CACO, COFA, CFEL, COSA PSP FOR CRANKSHAFTS IN CERTAIN D10 TRACTORS, D348 ENGINES, 776 TRACTORS, 777 TRUCKS, AND 992 LOADERS - PS0428 - MAILED US AND CAN ADA, CACO, COFA, CFEL, COSA
PRIORITY - NEW WASHERS NEED TO BE INSTALLED ON THE BOLTS THAT HOLD THE COUNTERWEIGHT TO THE CRANKSHAFT IN CERTAIN 777B, 789 TRU CKS; 3508, 3512, 3516 ENGINES - PI3444 - MAILED US AND CANADA, CFEL, COSA, MARINE TEPS, LIMITED CACO, LIMITED COFA PRIORITY - NEW WASHERS NEED TO BE INSTALLED ON THE BOLTS THAT HOLD THE COUNTERWEIGHT TO THE CRANKSHAFT IN CERTAIN 777B, 789 TRU CKS; 3508, 3512, 3516 ENGINES - PI3444 - MAILED US AND CANADA, CFEL, COSA, MARINE TEPS, LIMITED CACO, LIMITED COFA
SERVICE LETTER SUPPLEMENT FOR FEBRUARY 6, 1990 SL - PI3429 - PRIORITY - THE CRANKSHAFT NEEDS TO BE INSPECTED AND REPLACED IF NECESSARY IN CERTAIN 3516 MARINE, GENERATOR SET, INDUSTRIAL SPARK IGNITED, AND LOCOMOTIVE ENGINES; AND 789 TRUCKS - PI3429 - SERVICE LETTER SUPPLEMENT FOR FEBRUARY 6, 1990 SL - PI3429 - PRIORITY - THE CRANKSHAFT NEEDS TO BE INSPECTED AND REPLACED IF NECESSARY IN CERTAIN 3516 MARINE, GENERATOR SET, INDUSTRIAL SPARK IGNITED, AND LOCOMOTIVE ENGINES; AND 789 TRUCKS - PI3429 -
PSP FOR INSTALLING A NEW FAN AND/OR FAN BOLTS ON CERTAIN 3406B GENERATOR SET ENGINES (STANDBY - WITH 9Y0432 450 FRAME SR4 GEN ERATOR) - PS4461 - MAILED US, CANADA, CFEL PSP FOR INSTALLING A NEW FAN AND/OR FAN BOLTS ON CERTAIN 3406B GENERATOR SET ENGINES (STANDBY - WITH 9Y0432 450 FRAME SR4 GEN ERATOR) - PS4461 - MAILED US, CANADA, CFEL
PARTS STOCK ACTION ONLY - CERTAIN 2P5834 OIL FILTER ELEMENTS NEED TO BE REMOVED FROM PARTS STOCK - PI7236 - MAILED US, CAN ADA, CACO COFA, BRAZIL, CFEL, COSA PARTS STOCK ACTION ONLY - CERTAIN 2P5834 OIL FILTER ELEMENTS NEED TO BE REMOVED FROM PARTS STOCK - PI7236 - MAILED US, CAN ADA, CACO COFA, BRAZIL, CFEL, COSA
SERVICE LETTER EXTENSION FOR MAY 17, 1989 SL - PSP FOR TIMING ADVANCE RACE WEAR AND RETAINING RING LOSS ON CERTAIN 3406B TRU CK ENGINES - PS4300 - MAILED US AND CANADA, CACO, COFA, CFEL, TRUCK TEPS, LIMITED COSA SERVICE LETTER EXTENSION FOR MAY 17, 1989 SL - PSP FOR TIMING ADVANCE RACE WEAR AND RETAINING RING LOSS ON CERTAIN 3406B TRU CK ENGINES - PS4300 - MAILED US AND CANADA, CACO, COFA, CFEL, TRUCK TEPS, LIMITED COSA
PRIORITY - PARTS STOCK ACTION NEEDED - NEW GOVERNOR SPEED FILTER NEEDS TO BE INSTALLED ON CERTAIN 3606, 3608, 3612, AND 361 6 GENERATOR SET ENGINES - PI3464 - MAILED US AND CANADA, CACO, COFA, CFEL, LIMITED CFEL PRIORITY - PARTS STOCK ACTION NEEDED - NEW GOVERNOR SPEED FILTER NEEDS TO BE INSTALLED ON CERTAIN 3606, 3608, 3612, AND 361 6 GENERATOR SET ENGINES - PI3464 - MAILED US AND CANADA, CACO, COFA, CFEL, LIMITED CFEL
PSP FOR REPLACING WORN INTAKE VALVE AND/OR VALVE SEATS ON CERTAIN 3508, 3512, AND 3516 MARINE AND GENERATOR SET ENGINES - PS 0446 - MAILED US AND CANADA, CACO, COFA, BRZIL, CFEL, COSA, MARINE TEPS PSP FOR REPLACING WORN INTAKE VALVE AND/OR VALVE SEATS ON CERTAIN 3508, 3512, AND 3516 MARINE AND GENERATOR SET ENGINES - PS 0446 - MAILED US AND CANADA, CACO, COFA, BRZIL, CFEL, COSA, MARINE TEPS
PSP FOR REWORKING THE GOVERNOR ACTUATOR SOLENOID MOUNTING BRACKET AND OIL SUPPLY TUBE ON CERTAIN 3606, 3608, 3612, AND 361 6 ENGINES - PS0449 - MAILED US AND CANADA, CACO, COFA, CFEL, LIMITED COSA PSP FOR REWORKING THE GOVERNOR ACTUATOR SOLENOID MOUNTING BRACKET AND OIL SUPPLY TUBE ON CERTAIN 3606, 3608, 3612, AND 361 6 ENGINES - PS0449 - MAILED US AND CANADA, CACO, COFA, CFEL, LIMITED COSA
PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; E110B, E120B, E200B, EL2 00B, 213B, 214B, 224B, E240B, EL240B EXCAVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET EN GINES - PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; E110B, E120B, E200B, EL2 00B, 213B, 214B, 224B, E240B, EL240B EXCAVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET EN GINES -
PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; 213B, 214B, AND 224B EXC AVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET ENGINES - PS0456 - MAILED COSA PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; 213B, 214B, AND 224B EXC AVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET ENGINES - PS0456 - MAILED COSA
PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; E110B, E120B, E200B, EL2 00B, 213B, 214B, 224B, E240B, EL240B EXCAVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET EN GINES - PSP FOR REPLACING ERODED CYLINDER HEAD INJECTOR SLEEVES IN CERTAIN IT14B INTEGRATED TOOLCARRIERS; E110B, E120B, E200B, EL2 00B, 213B, 214B, 224B, E240B, EL240B EXCAVATORS; 446 BACKHOE LOADERS; AND 3114 AND 3116 INDUSTRIAL AND GENERATOR SET EN GINES -
PSP FOR INSTALLING A NEW FAN/RADIATOR SHROUD ON CERTAIN 3114 AND 3116 INDUSTRIAL AND GENERATOR SET ENGINES - PS0451 - MAI LED US AND CANADA, CACO, COFA, CFEL, COSA PSP FOR INSTALLING A NEW FAN/RADIATOR SHROUD ON CERTAIN 3114 AND 3116 INDUSTRIAL AND GENERATOR SET ENGINES - PS0451 - MAI LED US AND CANADA, CACO, COFA, CFEL, COSA
New Aftercooler Cover needs To Be Installed On Certain 3412 SI Engines New Aftercooler Cover needs To Be Installed On Certain 3412 SI Engines