1979/03/07 Caterpillar


New Exhaust Pipe Connector Makes A Tighter Seal Between Pipe And Manifold

Usage:


3208 Industrial And Truck Engines

Description of Change: A new connector assembly is used to fasten the exhaust pipe to the exhaust manifold on the above models. The new connector has an improved shape in the area that fits against the exhaust manifold. The improved shape gives a tighter seal to prevent possible leakage of exhaust gas.

Adaptable As: Direct replacement. The new 8N4709 Connector Assembly can be used in place of the former 9L7132 Connector Assembly on all earlier models. Two are used, one at each side of the engine. The former connector assembly is canceled and, if ordered, the new part will be sent.

Caterpillar Information System:

1979/03/07 Retroreflective Tape Makes Phototach Kit Easier To Read
1979/03/07 Use SIRS To Keep Service Literature Current
1979/03/07 New Fuel Injection Lines Groups Use A Different Fuel Injection Nozzle Assembly
1979/03/07 Engine Valve Springs Are Now Made Of Carbon Steel Alloy
1979/03/07 New Manifold Assembly Gives More Room For The Lifting Eye
1979/03/07 High Sulfur Fuel Can Cause Severe Engine Wear And Internal Damage
1979/03/07 New Larger Capacity Water Separator Is Available
1979/03/07 Stronger Suction Bell Assembly Now Used In Engine Oil Lines Group
1979/03/07 Federal Law Prohibits Tampering With Noise Control Systems
1979/01/24 List Of Service Publications
1979/01/24 Longer Bolts Are Now Used To Fasten The Engine Fan Assembly To The Adapter
1979/01/24 5P9705 Tapered Rod Tool Group Used For Removal And Installation Of Piston Pin Bearings In Tapered Connecting Rods
1979/03/14 New Oil Filter And Filter Base Assemblies
1979/03/14 New Piston And Connecting Rod Are Tapered In Area Of Piston Pin
1979/03/14 New Fuel Injection Nozzles Are Used In 3208 Engines
1979/03/14 New Engine Cylinder Block Used
1979/03/14 Improvements Made To Fuel Injection Pump And Governor Group
1979/03/14 Main Bearings Now Have Larger Diameter Oil Hole For Better Lubrication Of Main And Rod Bearings
1979/03/14 List Of Service Publications
1979/03/14 Revision To Guideline For Reusable Parts Is Available
1979/04/04 Four Crankshaft Rear Seals Are Available For Use On 3304 And 3306 Engines
1979/04/04 List Of Service Publications
1979/04/04 New Woodward Governor Control Used On Diesel Engines; Former Control Now Used On Gas Engines Only
1979/04/04 Fabricated Air-To-Water Aftercooler Available For Dynamometer Testing Of Engines Equipped With Air-To-Air Aftercoolers
Back to top
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.