1. Home
  2. Caterpillar
  3. Service Letter-Australia
  4. #rebe41160001

PRODUCT SUPPORT PROGRAM FOR REPLACING REAR LAMP BRACKET MOUNTING WASHERS ON CERTAIN 777D AND 773D OFF-HIGHWAY TRUCKS Caterpillar


PRODUCT SUPPORT PROGRAM FOR REPLACING REAR LAMP BRACKET MOUNTING WASHERS ON CERTAIN 777D AND 773D OFF-HIGHWAY TRUCKS

Usage:

REBE4116-00

Show/hide table
22Jul2008


D-314
O-351

 
Show/hide table
Before/After
  
  

PRODUCT SUPPORT PROGRAM FOR REPLACING REAR LAMP BRACKET MOUNTING WASHERS ON CERTAIN 777D AND 773D OFF-HIGHWAY TRUCKS
7553 1432 1430
PS42753
Show/hide table
NOTE:

This Program must be administered either before or after failure. In either case the decision whether to apply the Program is made by the dealer. When reporting the repair, use "PS42753" as the Part Number and "7755" as the Group Number. If administered before failure, use "56" as the Warranty Claim Description Code and "T" as the SIMS Description code. If administered after failure, use "96" as the Warranty Claim Description Code, and "Z" as the SIMS Description Code.
Show/hide table
NOTE:

The information supplied in this service letter may not be valid after the termination date of this program. Do not perform the work outlined in this Service Letter after the termination date without first contacting your Caterpillar product analyst.
Show/hide table

Show/hide table

TERMINATION DATE
31Jan2010

PROBLEM

Show/hide table
The 236-1485 Rear Lamp Mounting Bracket can become loose on certain 777D and 773D Off-Highway Trucks due to the contact area of the 8T-4896 Washer. A new washer (5P-1075) is introduced to provide better contact area and prevents loosening of Rear Lamp Mounting Bracket.

AFFECTED PRODUCT

Show/hide table
Model Identification Number
773D  NBJ00200-00311
777D  FKR00200-00288

PARTS NEEDED

Show/hide table

Qty

 Part Number Description
8 5P1075 WASHER-HARD
In order to allow equitable parts availability to all participating dealers, please limit your initial parts order to not exceed 9% of dealership population. This is an initial order recommendation only, and the ultimate responsibility for ordering the total number of parts needed to satisfy the program lies with the dealer.

ACTION REQUIRED

Show/hide table
Replace the existing eight 8T-4896 Washers with the new 5P-1075 Washers.
Show/hide table
Image1

SERVICE CLAIM ALLOWANCES

Show/hide table
Product smu/age whichever comes first
Caterpillar
Dealer Suggested
Customer Suggested
Parts %
Labor Hrs%
Parts %
Labor Hrs%
Parts %
Labor Hrs%
0-6000 hrs,
0-24 mo 
100.0%
100.0%
0.0%
0.0%
0.0%
0.0%
Show/hide table
 NOTE: This is a 0.5-hour job

Show/hide table


PARTS DISPOSITION

Show/hide table
Handle the parts in accordance with your Warranty Bulletin on warranty parts handling.
 
 
 

Caterpillar Information System:

PRODUCT SUPPORT PROGRAM FOR REPLACING 1S-9209 SHAFT ON CERTAIN 789C AND 793C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING 1S-9209 SHAFT ON CERTAIN 789C AND 793C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 773F, 775F, AND 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TRANSMISSION HARNESS ON CERTAIN 773F, 775F, AND 777F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING VARIOUS CAB COMPONENTS ON 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTING AND REWORKING VARIOUS CAB COMPONENTS ON 12M, 120M, 14M, 140M, 16M, 160M, AND 24M MOTOR GRADERS
PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW ECM SOFTWARE AND REPLACING THE VALVE GROUP-CONTROL-REAR STEERING ON CERTAIN PM-200 COLD PLANERS PRODUCT IMPROVEMENT PROGRAM FOR FLASHING NEW ECM SOFTWARE AND REPLACING THE VALVE GROUP-CONTROL-REAR STEERING ON CERTAIN PM-200 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS PRODUCT IMPROVEMENT PROGRAM FOR INSPECTION AND REWORK OF THE REMANUFACTURED IMPLEMENT PUMP ON CERTAIN D5H, D6H, D6M, D9R, D8N, D8R TRACK-TYPE TRACTORS, 24H MOTOR GRADERS, 5130B MINING EXCAVATORS, 854G WHEEL DOZERS, AND 992G WHEEL LOADERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT AND LIFT VALVE GROUP SOLENOIDS (DRIFT REDUCTION) ON CERTAIN 950H, 962H, 966H, 972H MEDIUM WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TILT AND LIFT VALVE GROUP SOLENOIDS (DRIFT REDUCTION) ON CERTAIN 950H, 962H, 966H, 972H MEDIUM WHEEL LOADERS AND IT62H INTEGRATED TOOLCARRIERS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER WASTEGATE CANISTER AND ENGINE SOFTWARE ON CERTAIN 740 AND 740EJ ARTICULATED TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE TURBOCHARGER WASTEGATE CANISTER AND ENGINE SOFTWARE ON CERTAIN 740 AND 740EJ ARTICULATED TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING REAR WHEEL LOOSE FIT STUDS ON CERTAIN 785C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING REAR WHEEL LOOSE FIT STUDS ON CERTAIN 785C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 125-5071 SPRINGS ON CERTAIN 777F OFF-HIGHWAY TRUCKS WITH 7N-5959 SPRINGS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 125-5071 SPRINGS ON CERTAIN 777F OFF-HIGHWAY TRUCKS WITH 7N-5959 SPRINGS
PRODUCT SUPPORT PROGRAM FOR REPLACING RIGHT AND LEFT JOYSTICK ON CERTAIN 246C, 256C, 262C, AND 272C SKID STEER LOADERS, 277C, 287C, AND 297C MULTI TERRAIN LOADERS PRODUCT SUPPORT PROGRAM FOR REPLACING RIGHT AND LEFT JOYSTICK ON CERTAIN 246C, 256C, 262C, AND 272C SKID STEER LOADERS, 277C, 287C, AND 297C MULTI TERRAIN LOADERS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL IN THE REAR AXLE ON CERTAIN CS-533E, CS56, AND CS74 SOIL COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE OIL IN THE REAR AXLE ON CERTAIN CS-533E, CS56, AND CS74 SOIL COMPACTORS
PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COILS ON HYDRAULIC MANIFOLD AND REWORKING THE ELECTRICAL WIRING GP ON CERTAIN AP-300 ASPHALT PAVERS PRODUCT IMPROVEMENT PROGRAM FOR REPLACING THE COILS ON HYDRAULIC MANIFOLD AND REWORKING THE ELECTRICAL WIRING GP ON CERTAIN AP-300 ASPHALT PAVERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 273-8942 SUPPORT AND THE 273-8945 SUPPORT ON CERTAIN 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REWORKING THE 273-8942 SUPPORT AND THE 273-8945 SUPPORT ON CERTAIN 777F OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE 209-6862 SWING FRAME ASSEMBLY ON CERTAIN 428E, 432E, AND 434E BACKHOE LOADERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE 209-6862 SWING FRAME ASSEMBLY ON CERTAIN 428E, 432E, AND 434E BACKHOE LOADERS
PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL TANK ON CERTAIN PM-200 COLD PLANERS PRODUCT SUPPORT PROGRAM FOR REWORKING THE FUEL TANK ON CERTAIN PM-200 COLD PLANERS
PRODUCT IMPROVEMENT PROGRAM FOR MODIFYING THE SEAT ADJUSTMENT ON CERTAIN CB-214D, CB-224D, CB-225D, CB-214E, CB-224E, AND CB-225E UTILITY COMPACTORS PRODUCT IMPROVEMENT PROGRAM FOR MODIFYING THE SEAT ADJUSTMENT ON CERTAIN CB-214D, CB-224D, CB-225D, CB-214E, CB-224E, AND CB-225E UTILITY COMPACTORS
PRODUCT SUPPORT PROGRAM FOR REPLACING THE BODY RETAINING CABLE ON CERTAIN 785C TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE BODY RETAINING CABLE ON CERTAIN 785C TRUCKS
PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 785C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 785C OFF-HIGHWAY TRUCKS
PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 789C OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR RESEALING THE CYLINDER HEAD TO BLOCK JOINT ON CERTAIN 789C OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A REVISED FLASH FILE ON THE ENGINE ELECTRONIC CONTROL MODULE ON CERTAIN C4.4 INDUSTRIAL ENGINES
PRODUCT SUPPORT PROGRAM FOR REPLACING THE 267-3023 BAFFLE ASSEMBLY ON CERTAIN 777F OFF-HIGHWAY TRUCKS PRODUCT SUPPORT PROGRAM FOR REPLACING THE 267-3023 BAFFLE ASSEMBLY ON CERTAIN 777F OFF-HIGHWAY TRUCKS
PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A 161-1272 COVER GROUP-WIRING HARNESS ON CERTAIN R1600G LOAD HAUL DUMPS PRODUCT IMPROVEMENT PROGRAM FOR INSTALLING A 161-1272 COVER GROUP-WIRING HARNESS ON CERTAIN R1600G LOAD HAUL DUMPS
PRODUCT SUPPORT PROGRAM FOR INSTALLING COLD START ARRANGEMENT ON CERTAIN 511 AND 521 TRACK FELLER BUNCHERS PRODUCT SUPPORT PROGRAM FOR INSTALLING COLD START ARRANGEMENT ON CERTAIN 511 AND 521 TRACK FELLER BUNCHERS
PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK PRODUCT IMPROVEMENT PROGRAM FOR REMOVING CERTAIN 303-9566 SWITCHES FROM DEALER PARTS STOCK
Back to top
Contacts My AVS
The names Caterpillar, John Deere, JD, JCB, Hyundai or any other original equipment manufacturers are registered trademarks of the respective original equipment manufacturers. All names, descriptions, numbers and symbols are used for reference purposes only.
CH-Part.com is in no way associated with any of the manufacturers we have listed. All manufacturer's names and descriptions are for reference only.