Updated Wiring Configuration is Now Used on Certain 3412 Generator Sets {1404}
- Electric Power Generation
- 3412 GENSET (S/N: DK61-1209)
Description Of Change: Updated wiring configuration is now used on certain machines listed above. The updated wiring ensures proper generator set wiring and improves service life of the machine.
Adaptable To:
Show/hide table
 |
|
Do not operate or work on this product unless you have read and understood the instruction and warnings in the relevant Operation and Maintenance Manuals and relevant service literature. Failure to follow the instructions or heed the warnings could result in injury or death. Proper care is your responsibility. |
Updated wiring configuration is now available on SAP. Confirm the alternator configuration type from the supplier and ensure this is selected in Engine Order Management Project (EOMP), and the configuration type mentioned in the sales notes for engineering to discuss at timeline.
Show/hide table
| |
| Illustration 1 | g06403547 |
|
Generator set wiring | |
Ensure that the alternator is wired for series star or parallel star as shown in Illustration 1. Review Table 1 and 2 given below which confirms the wiring configuration for each alternator part number, giving particular attention to the dedicated windings for 380V parallel star.
Show/hide table
| Standard Windings: | Standard | CIP | PREMIUM | 60Hz | 50Hz | ||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
| Cat codes | 220 | 240 | 440 | 480 | 380 | 400 | 415 | ||||
| ECO43-1S/4 | p.star | p.star | s.star | s.star | s.star | s.star | s.star | ||||
| ECO43-2S/4 | p.star | p.star | s.star | s.star | s.star | s.star | s.star | ||||
| ECO43-1M/4 | p.star | p.star | s.star | s.star | s.star | s.star | s.star | ||||
Show/hide table
| Dedicated Windings: | Standard | CIP | PREMIUM | 60Hz | |
|---|---|---|---|---|---|
| 380V 60Hz | Cat codes | 380 | |||
| ECO43-1S/4 | p.star | ||||
| ECO43-2S/4 | p.star | ||||
| ECO43-1M/4 | p.star | ||||
Caterpillar Information System:
Exhaust Rain Cap is Now Repositioned on Certain C7.1 Generator Set Engines {1072} Exhaust Rain Cap is Now Repositioned on Certain C7.1 Generator Set Engines {1072}
26SI Reman Charging Alternator Group Has Been Discontinued {1405} 26SI Reman Charging Alternator Group Has Been Discontinued {1405}
Water Couplings Can Be Damaged from Over Torquing on Certain C175 Engines {1380} Water Couplings Can Be Damaged from Over Torquing on Certain C175 Engines {1380}
Preservation Procedure for Intake System Is Now Used on Certain Cat® Engines {1052, 1053, 1201, 1216} Preservation Procedure for Intake System Is Now Used on Certain Cat® Engines {1052, 1053, 1201, 1216}
A False 1684-12 Code May Trip on Certain Tier 4 C175 Off-Highway Truck Engines {125H} A False 1684-12 Code May Trip on Certain Tier 4 C175 Off-Highway Truck Engines {125H}
320 GC, 320, 323, 330 GC and 330 Excavator Machine Systems Troubleshooting Sensor (Data Link Type) - Test
Fuel Dilution of Engine Oil May Occur on Certain C27 and C32 Machine Engines {1290} Fuel Dilution of Engine Oil May Occur on Certain C27 and C32 Machine Engines {1290}
Engine Display Data Loss May Occur on Certain 3412C Engines {1902} Engine Display Data Loss May Occur on Certain 3412C Engines {1902}
Certain 3412 Generator Sets Wiring May Be Configured Incorrectly {1404, 1404} Certain 3412 Generator Sets Wiring May Be Configured Incorrectly {1404, 1404}
New Generator Support Assembly is Now Used on Certain 3412C Generator Sets {0635, 1273} New Generator Support Assembly is Now Used on Certain 3412C Generator Sets {0635, 1273}
320 GC, 320 and 323 Excavator Machine Systems Specifications Fuel Filter Mounting
Correct Product ID is Now Being Set on Cat® Product Link Devices (Telematics Boxes) Used on Machines Programmed From the Factory {7606} Correct Product ID is Now Being Set on Cat® Product Link Devices (Telematics Boxes) Used on Machines Programmed From the Factory {7606}
Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405} Drive End Bearing Service For 50/75 Amp Brushless Alternators {1405}
New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408} New Control and Panel Harness Assemblies are Now Used on Certain Cat® Engines {1408}
Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Armature of Starter Motor On All Cat® Products {1408, 1450, 1453}
Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453} Procedure to Replace Commutator End (CE) Housing of Starter Motor On All Cat® Products {1408, 1450, 1453}
Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490} Fogging May Appear Inside Monitor On Certain Mini Hydraulic Excavators {7490}
Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274} Rain Gutter Panel Support May Be Installed Upside Down On Certain Generator Sets {7263, 7274}
320 GC, 320 and 323 Excavator Machine Systems Specifications Swing Motor
New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380} New Coolant Lines for Pump Electronic Tank Unit (PETU) are Now Used on Certain Off-Highway Trucks {108U, 1380}
A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317} A New Crankcase Breather Assembly Clamp is Now Used for Certain C175 Commercial Engines {1317}
The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X} The Dosing Cabinet and Clean Emissions Module for the Retrofit Aftertreatment is Discontinued {108X}
Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961} Commissioning Procedure for 794 AC, 796 AC, and 798 AC Off-Highway Trucks is Updated {1000, 7000, 7961}
The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305} The Wiper Motor May Fail on Certain Next Generation Hydraulic Excavators {7305}