Illustration 1 | g00559405 |
(1) Stick Out
(2) Swing Right (3) Stick In (4) Swing Left (5) Boom Lower (6) Tool Open (7) Boom Raise (8) Tool Close (9) HOLD |
The Fine Swing Control delays the engagement of the swing parking brake. If the machine is operating on a slope with the Fine Swing Control in the ON position, the swing motion may become uncontrollable which could result in property damage, personal injury or death. Turn the Fine Swing Control to the OFF position when the machine is operating on a slope. |
When you release the joysticks from any position, the joysticks will return to HOLD position (9). Movement of the upper structure will stop unless the fine swing control (if equipped) is ON. When the fine swing control is ON, the swing parking brake will not activate until 6.5 seconds after the joystick control for the swing function returns to the HOLD position.
The machine control pattern is initially set at the factory to the SAE system, as shown. The pattern on the left pertains to the left joystick and the pattern on the right pertains to the right joystick.
The machine control pattern can be varied. Refer to Operation and Maintenance Manual, "Joystick Controls Alternate Patterns" for more information.
Two functions may be performed at the same time by moving a joystick diagonally.
Illustration 2 | g06310281 |
(A) Left joystick
(B) Right joystick (1) Horn switch (2) One touch low idle |
When horn switch (1) is depressed, the horn will sound.
When one-touch low idle (2) is pressed, the engine rpm is dropped. When a function is moved from the neutral position, one-touch low idle is turned off and the machine resumes the set throttle setting.