New Instruction for Tightening Fuel Cooler Hose is Now Available for Certain C15 and C18 Engines {1353, 1712}
- Generator Set
- C15 GEN SET (S/N: LNA1-UP; L8B1-UP; LXJ1-UP; NAP1-UP)
- C18 GEN SET (S/N: LNB1-UP; L8D1-UP; LXK1-UP; NAW1-UP)
New tightening instruction for fuel cooler hose to fuel cooler is now available for certain C15 and C18 engines.
When replacing fuel cooler or hose assembly. Use second wrench to hold fuel cooler fitting, when tightening Hose Assembly. Over torqueing may result in fuel cooler damage.
Show/hide table
Illustration 1 | g06263963 |
Show/hide table
Illustration 2 | g06263966 |
Wrench |
Show/hide table
Illustration 3 | g06263967 |
Hose Assembly |
Caterpillar Information System:
New Engine Software is Now Used for Certain C175 Locomotive Engines {1920} New Engine Software is Now Used for Certain C175 Locomotive Engines {1920}
XQP1100 Generator Set Generator Operation
PM620, PM622, PM820, PM822 and PM825 Cold Planer Machine System Pump Control
G3516 TA Engine Engine Timing Actuator - Test
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Operator Controls
A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467} A New Electrical Starter Group and Solenoid Kit is Now Used for Certain G3304 and G3306 Engines {1453, 1467}
C280-16 Marine Engines Ordering Replacement Parts
New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378} New Oil Cooler Components Are Now Used for Certain G3500 Series Engines {1378}
An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741} An Audible Knock Is Heard on Certain 3500 Dynamic Gas Blending Engines {1278, 1280, 1741}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Blade Operation
New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053} New Turbochargers are Now Used on Certain 3512C and 3516C Marine Engines {1052, 1053}
C7.1 Marine Propulsion Engine Crankcase Breather - Install
New Injector Hold Down Clamps Are Used for Certain C175 Locomotive Engines {1251, 1290} New Injector Hold Down Clamps Are Used for Certain C175 Locomotive Engines {1251, 1290}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Seat
Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273} Update on Plastic Plugs for Certain Cat® C13 and C15 Defra Base Generator Sets {1273}
New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403} New Injector Jumper Harness is Now Available for Certain 3406E Truck Engines {1120, 1403}
New Engine Software Are Now Used for Certain C27 and C32 Engines {1920} New Engine Software Are Now Used for Certain C27 and C32 Engines {1920}
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Alternate Exit
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Mounting and Dismounting
301.5, 301.6, 301.7 CR, 301.8 and 302 CR Mini Hydraulic Excavators Parking
C7.1 Marine Propulsion Engine Flywheel Housing - Remove and Install
C9.3B Engines Manifold (Diesel Exhaust Fluid)
3516C Petroleum Engine Fuel System - Prime
C32 XQP1100 Generator Sets Diagnostic Trouble Codes