1985/01/16 Caterpillar

Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal

Usage:

All 3500 Series Engines

SUPPLEMENT: 10/00/85

ENGINE NEWS, JANUARY 16, 1985, PAGE 2.

The article "Improved Valve Mechanism Cover Group Has A New Valve Cover And Seal", should also include a new 7W2480 Tube Assembly (fuel line). On engines equipped with the former fuel lines, the fuel line must be removed before the valve cover can be removed. The new fuel line allows the valve cover to be removed without interference. The new 7W2480 Tube Assembly is a direct replacement for the former 8N8785 Tube Assembly which is canceled.

--------------- END SUPPLEMENT ---------------

Description of Change: An improved valve mechanism cover group is used on 3500 Series Engines. The improved valve mechanism cover group has a new valve cover and an O-ring seal instead of the rectangular seal used with the former valve cover. The new O-ring seal is easier to install and gives a better seal.

Adaptable To: The new components of the 7N1855 Valve Mechanism Cover Group are adaptable to all 3500 Series Engines. For parts service see Chart A.

The improved 7N1855 Valve Mechanism Cover Group is in effect on 3500 Series Engines as shown in Chart B.

Caterpillar Information System:

1985/01/16 Install Different Body Assembly In Clutch Group To Correct Harsh Shifting

1984/12/12 Bonnet Of Fuel Injection Pump Group Now Serviced Separately

1984/12/12 New Fuel Injector Assembly Reduces Smoke When Operating At Lower RPM And Load

1984/12/12 Use Care When Installing Circuit Boards In Regulators

1984/12/12 Remanufactured Cylinder Head Groups

1984/12/12 Important Differences In Engine Arrangements On 3208 Engines Equipped With Turbochargers

1984/12/12 Rear Power Take-Off Clutch Can use Nonmetallic Plates And Grease Lubrication For Main Bearings

1984/12/12 New Seal Used In Alternator Mounting Group

1984/12/12 Identification Of Camshaft Groups And Valve Mechanism Groups

1984/12/12 Preferred Engine Timing Procedures

1984/12/12 Addition Of Lubricator Will Help Prevent Corrosion In Air Prelube Motors

1984/12/12 Additional Clamp Reduces Vibration Of Turbocharger Oil Supply Line

1985/01/16 Valve Lash Adjustment Not A Warranty Item

1985/01/16 Additions To Reference Chart For Major Production Changes

1985/01/16 Remanufactured Air Fuel Ratio Controls (U.S. And Canada)

1985/01/16 List of Service Publications

1985/01/16 Correct Specifications For Crankshaft Deflection

1985/01/16 Fill Oil Sump Before Installing Woodward Governor

1985/01/16 New Tools Available To Service Fuel Injection Nozzles And Adapters

1985/01/16 New Engine Time Requirement Guides (TRG)

1985/01/16 New Air Pipe Retainers Used To Connect Turbocharger To Aftercooler

1985/01/16 New And Improved Gaskets In Front Housing Group And Accessory Drive Group

1985/02/01 Low Oil Level In Governor Can Cause Erratic Engine RPM

1985/02/01 Call Toll-Free Numbers For Location Of Nearest Caterpillar Marine Engine Dealer