A New Cylinder Liner Insert Is Now Used On Certain 3500 Engines {1201, 1217}
- Engine
- 3500 and G3500 Engines
Description Of Change: A new sealed insert which utilizes an edge bonded rubber seal has been introduced to replace the current liner inserts.
Adaptable To: Sealing insert kits 473-0493 and 473-0494 which will be used in place of former inserts.
Refer to Reuse and Salvage Guidelines, SEBF8255, "Procedure to Salvage Cylinder Blocks of 3500 Engines" for application and installation information.
Note: Serviced only as a kit containing one insert, and one seal, individual seals are not available, and these new parts must be used as a set. 489-0635 Tool As has been released to install the new inserts.
The sealed inserts were implemented in 3500 Series Cat Remanufactured Engines in October 2015, for blocks that were salvaged with inserts.
Show/hide table
| |
| Illustration 1 | g06105139 |
Show/hide table
| |
| Illustration 2 | g06105141 |
Caterpillar Information System:
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Remove
TR35 Locomotive Transmission Transmission Oil Pump - Assemble
TR35 Locomotive Transmission Transmission Oil Pump - Disassemble
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Assemble
C175-16 and C175-20 Locomotive Engines Engine Oil Pan - Install
C175-16 and C175-20 Locomotive Engines Auxiliary Water Pump - Disassemble
Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225} Connecting Rod Bolt Replacement Procedure On Certain C13 Industrial Engines {1218, 1225}
C175-16 and C175-20 Locomotive Engines Water Pump - Assemble
New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270} New Regulator Service Kits Are Now Available for Certain G3300, G3500, and 3500 Dynamic Gas Blending Engines {1270}
C175-16 and C175-20 Locomotive Engines Water Pump - Disassemble
C175-16 Locomotive Engine Engine Operation
C175-16 Marine Propulsion Engines Fuel System Verification - Test
C175-16 and C175-20 Locomotive Engines Fuel and Auxiliary Water Pump Drive - Remove and Install
C2.4 Tier 4 Final Engines for Caterpillar Built Machines Cylinder Is Noisy
C175-16 and C175-20 Locomotive Engines Fuel Transfer Pump - Install
SPF343 and SPF343C Trailer Mounted Pumpers Model View Illustrations
C175-16 and C175-20 Locomotive Engines Fuel Control Valve - Remove and Install
PM820, PM822, and PM825 Cold Planer Machine Systems Conveyor Pulley (Head, First Stage) - Remove and Install
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Camshaft
3500E EPA Tier 4 Final and IMO-II/III Switchable Marine Engines Crankshaft
New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920} New Wide Band 02 Sensors and Software Are Now Used on Certain G3306B Turbocharger Engines {108H, 1408, 1920}
C175-16 and C175-20 Locomotive Engines Fuel Lines - Install - High Pressure
C280 Marine Engines Solenoid Valve (DEF Return)
C175-16 Locomotive Engine Thermostatic Valve - Inspect