- Engine
- G3516B (S/N: JEF1-UP)
The new water lines group have been improved to increase the durability. Also the water lines group was redesigned to implement the single piece design to reduce complexity and connection points.
Refer to Table 1 for the serial numbers that have the former tubes and new tube.
Serial Numbers With Former Tubes |
S/N:JEF00001-03243 |
Serial Numbers With New Tube |
S/N:JEF03244-UP |
Caterpillar Channel 1 Videos
For supplemental information on this procedure, refer to the following video. The previous training has been replaced with the video below.
Note: A CWS login is required to access Caterpillar Channel 1. Scan the QR code below with a QR enabled device or copy the link that follows.
Illustration 1 | g06306276 |
Graphic Color Description
Color-coding of targeted components, or sections of a part, is used to communicate a required action.
This table shows the different colors and what is represented when used in a graphic.
Illustration 2 | g06009677 |
Graphic Symbol Description
This section includes all the symbol graphics used throughout the Visual Service Procedure (VSP), along with a brief description of what the symbol represents.
Insert - To place or fit into another object |
Remove - To take off. |
Tighten - To make nearer to fully stretched; without slack; to apply tension or torque. |
English (SAE) Fasteners
The following table has the recommended standard torque values.
Nuts and Bolts | ||
---|---|---|
Thread Size
Inch |
Standard Torque | |
1/4 | |
|
5/16 | |
|
3/8 | |
|
7/16 | |
|
1/2 | |
|
9/16 | |
|
5/8 | |
|
3/4 | |
|
7/8 | |
|
1 | |
|
1 1/8 | |
|
1 1/4 | |
|
1 3/8 | |
|
1 1/2 | |
Metric (ISO) Fasteners
The following table has the recommended standard torque values.
Nuts and Bolts | ||
---|---|---|
Thread Size
Metric |
Standard Torque | |
M6 | |
|
M8 | |
|
M10 | |
|
M12 | |
|
M14 | |
|
M16 | |
|
M20 | |
|
M24 | |
|
M30 | |
|
M36 | |
Parts List
Illustration 3 | g06068663 |
Parts List | |||
Item | Qty | Part Number | Part Name |
1 | 2 | Seals-O-Ring | |
2 | 2 | Seals-O-Ring | |
3 | 4 | Clamp As. | |
4 | 4 | Bolts | |
5 | 14 | Washers-Hard | |
6 | 5 | Nuts-Full | |
7 | 4 | Bolts | |
8 | 1 | Tube As. | |
9 | 1 | Clip | |
10 | 1 | Clip | |
11 | 1 | Grommet | |
12 | 1 | Bolt | |
13 | 1 | Washer-Hard | |
14 | 1 | Support | |
15 | 2 | Bolts | |
16 | 1 | Seal-O-Ring | |
17 | 1 | Plug-Stor |
Removal Procedure
Illustration 4 | g06069534 |
Illustration 5 | g06069569 |
Installation Procedure
Illustration 6 | g06069650 |