Use 6V4172 Injector Sleeve When You Clean Fuel Injectors
Usage:
3500 Series Engines
The 6V4172 Injector Sleeve is now available to close the fuel ports in the unit injectors for the above engines. Since solvent and an air hose are normally used to clean the outside of the injector, open fuel ports can cause problems. The new sleeve keeps the inside of the injector free from dirt and/or foreign material during this procedure.
To install the 6V4172 Injector Sleeve, remove the injector from the cylinder head and fit the sleeve over the O-rings on the injector.
6V4172 Injector Sleeve
Caterpillar Information System:
1981/07/15 Mailing Of Engine News And Truck Engine News Microfiche Libraries
1981/07/15 New Retainers Used To Hold Oil Pump Output Tube In Manifold
1981/07/15 Remove Piston Cooling Tubes Before Removal Of Pistons And Connecting Rods
1981/07/15 All Size Identification Marks On Engine Bearings Are Now Shown In Millimeters
1981/07/15 Stronger Fitting Used With Sending Unit For Oil Pressure Gauge
1981/07/15 New Turbocharger, Turbocharger Oil Line And Aftercooler Air Lines Group Used
1981/07/15 Ring Now Used To Hold Bearing In Auxiliary Drive Group
1981/07/15 Use 6V4068 Tool Group To Machine Camshaft Thrust Face
1981/07/01 Troubleshooting Water In Shut-Off Solenoid Housing
1981/07/01 Larger Air Cleaner Used For Less Restriction To Air Flow
1981/07/01 New Service Meter Used In Mechanical Shutoff Group
1981/07/01 List Of Service Publications
1981/07/15 6V4133 Wedge Bracket Makes Cylinder Liner Removal Easier
1981/07/15 Procedure To Stop Lubricant Leakage From Flexible Couplings
1981/07/15 Use 6V4828 Snap Ring Pliers To Remove Snap Rings From Turbocharger Housing
1981/07/15 Single Connector Prevents Leakage From Fuel Filter Lines Groups
1981/08/26 New Spanner Wrenches Needed To Install Bearings On Marine Transmission Shafts
1981/08/26 O-Ring Seal Materials And Applications: Use Only The Correct Seal For The Specific Installation
1981/08/26 Use Of Different Anti-Seize Compound Prevents Problems With S.O.S. Tests
1981/08/26 New Spacers Used With Larger Valve Springs
1981/08/26 Improvements To Optional Modification Of 5P4150 Nozzle Tester
1981/08/26 Delay Expected In Replacement Of Canceled Service Tools
1981/08/26 Use Correct Parts In Oil Pressure Relief Valve
1981/08/26 New Idler Pulley Groups Improve Service Life Of Vee-Belt