6V3075 Dial Indicator (Metric) Is Available
Usage:
The 6V3075 Dial Indicator reads in the International System of Units (SI - metric). It has a total movement of 25 mm (.984"). The negative movement is 7 mm (.276") from its zero position and the positive movement is 18 mm (.709") from its zero position.
The 6V3075 Dial Indicator can be used in all applications where a 9S215 Dial Indicator is used and an SI indication is desired.
The 6V3075 Dial Indicator is directly adaptable to some fuel systems where specifications are given in SI units. Other applications will be given as new tools are released.
Caterpillar Information System:
1980/07/09 6V2050 Tapered Rod Tool Group Available For Removal And Installation Of Bearings
1980/06/04 Oil Pump Drive Sleeves Now Available Separately For Parts Service
1980/06/04 New Part Available To Check The 3S1467 Plunger And Barrel Assemblies
1980/06/04 New Cylinder Sleeve Is Available For Repairs Of Worn And/Or Damaged Cylinders
1980/06/04 New Check Valve Used In Fuel Injection Pump Assembly
1980/06/04 Check For Short Circuit In Rotor Field Windings If Low AC (Alternating Current) Voltage Is A Problem
1980/06/04 Reverse Flow Check Assembly Now Used In Fuel Injection Pump Assemblies
1980/06/04 Improved Procedure Can Be Used To Adjust Voltage Gain
1980/06/04 New Plug With Straight-Threads Used In Engine Variable Timing Drive
1980/06/04 Improvements To Engine Oil Lines Group Makes Installation Easier; Prevents Reverse Connections
1980/06/04 Possible Cause Of A Low Idle Misfire And/Or Backfire
1980/05/14 Boss Can Be Removed From Spacer Plate Cylinder Block To Get Clearance For Oil Filler Tube
1980/07/09 Kysor Air-Operated Shutdown Actuators For 3406, 3408, 1693 Truck Engines
1980/07/09 Follow Correct Procedures For Installation Of Fuel Filters And Priming The Fuel Systems
1980/07/09 New Planetary Group Has Gears Which Operate With Lower Noise Levels
1980/07/09 Visual Checks And Easy Tests Can Be Of Assistance When Troubleshooting Coolant Leakage Into The Lubrication System
1980/07/09 Timing Groups To Be Canceled
1980/07/09 List Of Service Publications
1980/07/09 In The Future, Oversize And Undersize Connecting Rod And Main Bearings Will Have Size Identification Marks In Metric Units
1980/07/09 Check Journal Hardness On Reground Crankshafts
1980/07/09 Check Retainer Screw Depth In Plastic Pads Of 5P8637 Crankshaft Support Groups
1980/08/13 Improved Power Takeoff Service Kits
1980/08/13 Some Nuts Used On Main Bearing Caps Are Smaller Than Standard Size Across The Flat Sides
1980/08/13 New Bend Specification For Used Or Field Reground Crankshafts