Engine Air Precleaner - Clean
Show/hide table
Illustration 1 | g03421035 |
Note: In order to access the engine air precleaners, it may be necessary to use a portable access system (ladder, stair assembly, man lift, or other portable access system) that is suitable and compliant to local regulations.
Show/hide table
Illustration 2 | g01180274 |
Note: Do not paint dust valves (3). Paint will cause the rubber to harden and the rubber may not seal properly.
Perform the following procedure for each engine air precleaner (4).
- Prepare the machine for maintenance. Refer to Operation and Maintenance Manual, "Prepare the Machine for Maintenance".
- Loosen clamp (1) on the precleaner and remove lower precleaner bowl (2) and dust valve (3).
- Clean the lower precleaner bowl and the dust valve with air pressure.
- Make sure that all of the tubes within the precleaner are free of dirt. Clean the tubes, if necessary.
- Install the clean lower pre-cleaner bowl, and the clean dust valve and tighten the clamp on the precleaner.
- Repeat steps 2 through 5 for each precleaner.
Show/hide table
NOTICE |
---|
Do not operate the machine with the dust valves removed. Engine damage can occur. |
Caterpillar Information System:
794 AC Off-Highway Truck Cab Air Filter - Clean/Replace
794 AC Off-Highway Truck Automatic Lubrication Reservoir - Fill
XQC1600 Power Module Sound Information
UPS 120, UPS 150, UPS 250, UPS 300, UPS 301, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supplies Modbus Register Map
XQC1600 Power Module Product Description
PM620 and PM622 Cold Planer Slope Operation
2013/08/19 New Software Is Now Available For All Cat® Products With PL522 China System {7606, 7620}
C175-16 Locomotive Engine Flywheel Housing Cover
C4.4 Industrial Engine Sensors and Electrical Components
C4.4 Industrial Engine Monitoring System - Engine Indicators and Aftertreatment Indicators
Procedure for Installing Capacitor Assembly on Certain UPS{4480} Procedure for Installing Capacitor Assembly on Certain UPS{4480}
2014/05/20 Low Engine Oil Pressure Issues, Oil Pump Failures for C9 and C9.3 Commercial Engines {1304, 1315}
794 AC Off-Highway Truck Frame and Body - Inspect
794 AC Off-Highway Truck Frame and Body Support Pads - Clean/Inspect
C175-16 Locomotive Engine Exhaust Diffuser Adapter
C175-16 Locomotive Engine Flywheel
349F and 352F Excavator Machine System Wiring Harness (Open Circuit) - Test
349F and 352F Excavator Machine System Wiring Harness (Short Circuit) - Test
C15 and C18 Engines for China On-Highway Phase IV Event Codes
C4.4 Industrial Engine Diagnostic Flash Code Retrieval
349F and 352F Excavators Parking
C4.4 Industrial Engine Configuration Parameters
C15 and C18 Engines for China On-Highway Phase IV ARD Is Disabled
C15 and C18 Engines for China On-Highway Phase IV Coolant Level Is Low