New Fuel Lines Kits Are Used on Certain C9.3 Industrial Engines {1288}
- Engine:
- C9 (S/N: N1F1-UP; CS91-UP)
- Industrial Engine:
- C9.3 (S/N: C9N1-UP; D9N1-UP)
Description of Change: The new fuel lines kits have an increased service life over the existing parts.
Adaptable To: Refer to Table 1 for a list of the new part numbers. These new parts are adaptable back to first production on the serial numbers listed above.
Show/hide table
New Part Number     | Description     | Quantity     | Former Part Number     |
423-4359     | Fuel Tube     | 3     | 356-5217     |
428-6096     | Fuel Lines Kit     | 1     | 356-0831     |
428-6097     | Fuel Lines Kit     | 1     | 356-0828     |
428-6098     | Fuel Lines Kit     | 2     | 356-0832     |
Caterpillar Information System:
2013/06/06 An Alternate Fuel Line Is Available For Certain C18 Marine Engines {1274}
C15 and C18 Tier 4 Final Engines Clean Emissions Module
Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F} Aftertreatment Filter Maintenance on Tier 4 Final Products Equipped with a Diesel Particulate Filter (DPF), Diesel Oxidation Catalyst (DOC) and a Selective Catalyst Reduction (SCR) Filter {108F}
Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714} Installation of a Dual Tapered Roller Bearing HEUI Hydraulic Pump onto Certain C7 ACERT Engines {1714}
C13, C15, and C18 Tier 4 Final Engines Turbocharger
C13 Engine for Caterpillar Built Machines Temperature Sensor (DPF Inlet, Flame Detect) - Remove and Install
Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803} Procedure to Install A New Mounting Bracket Group for the Air Compressor on Certain C-18 Commercial Engines{1803}
Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050} Caterpillar Off-Highway Truck (777, 785, 789, 793, and 797) Technician Checklist Final Drive Removal and Installation {0372, 0374, 4001, 4001, 4011, 4011, 4050, 4050}
Water Delivery System and 777F WTR, 777G WTR and 785D WTR OEM Off-Highway Trucks Display Module Software - Install
Troubleshooting for Caterpillar Well Stimulation Pumps {5070} Troubleshooting for Caterpillar Well Stimulation Pumps {5070}
C7.1 Marine Generator Set General Hazard Information
UPS 250, UPS 300, UPS 500, UPS 600, UPS 750 and UPS 900 Uninterruptible Power Supply DC Bus Capacitor - Remove and Install
2013/06/11 A New Prechamber and Gasket Are Available for Certain G3600 Engines {1106}
C9.3 Engines for Caterpillar Built Machines Inlet Module (Catalyst) - Remove and Install
C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052} C175 HAA Air System Lifting Device{0599, 0629, 0632, 1052, 1052}
2013/07/22 New Exhaust Manifold Groups Are Available for Certain 3512C Petroleum Engines {1059}
Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822} Instructions for Determining Failed Active Power Module (APM) Inverter on Certain Uninterruptible Power Supplies{1418, 4822}
C13 Engine for Caterpillar Built Machines Fuel Transfer Pump - Remove and Install
C13 Engine for Caterpillar Built Machines Fuel Filter Base - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Cooler (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Turbocharger - Remove and Install
C13 Engine for Caterpillar Built Machines Exhaust Gas Valve (NRS) - Remove and Install
C13 Engine for Caterpillar Built Machines Ignition Coil - Remove and Install
C13 Engine for Caterpillar Built Machines Combustion Head - Remove and Install