Fuel Injection Pump Gear - Remove
Show/hide table
所需工具 | |||
工具 | 零件号 | 零件描述 | 数量 |
A(1) | 9U-6198 | 曲轴转动工具 | 1 |
A(2) | 9U-7336 | 壳体 | 1 |
5P-7305 | 发动机盘车工具 | 1 | |
B | 230-6284 | 正时销(凸轮轴) | 1 |
C | 136-4632 | 正时销(曲轴) | 1 |
268-1966 | 适配器 | 1 | |
D | - | 拉拔器 | 1 |
E | - | 螺栓(M10 x 1.50 x 130 mm) | 2 |
Show/hide table
(1) | 曲轴转动工具用于前皮带轮。 |
(2) | 该工具在电动起动马达的孔上使用。 |
开始:
- 拆下前盖。 请参阅拆解和组装, "前盖 - 拆卸和安装"以了解正确步骤。
Show/hide table
注意 |
---|
保持所有零件清洁无杂质。 杂质会造成快速磨损和缩短部件寿命。 |
Show/hide table
注意 |
---|
在检验、保养、测试、调整及维修产品时,务必留心,确保液体盛装在容器中。 在打开任何腔室或拆解任何储有液体的部件之前,要准备好用合适的容器收集液体。 按照本地法规和指令处置所有液体。 |
注: 可以使用两个工具 (A) 中的任意一个。 请使用最适用的工具。 必须小心操作,确保在前齿轮组件的拆卸过程中不会改变喷油泵正时。 小心地遵循本步骤来卸下齿轮组件。
- 从缸体上拆下螺塞 (2)。 将 O 形密封圈 (1) 从螺塞上拆下。
- 使用工具 (A) 转动曲轴,使 1 号活塞处于其压缩冲程的上止点位置。 有关正确的步骤,请参阅系统操作、测试和调整, "查找 1 号活塞上止点位置"。
- 将工具 (C) 穿过孔 (W) 安装,以锁定曲轴。
注: 安装工具 (C) 时不要使用过大的力量。 在修理过程中不要使用工具 (C) 固定曲轴。
Show/hide table图 2 g03383730 - 将工具 (B) 穿过凸轮轴齿轮 (3) 的孔 (X) 安装到前壳体中。 使用工具 (B) 将凸轮轴锁定到位。
Show/hide table
图 3 g03383775 正时标记的对准 - 标记齿轮 (3)、齿轮 (4) 和齿轮 (5) 以便显示对准位置。 参考图 3。
注: 识别标记能确保将齿轮安装在原来的对准位置。
- 松开燃油泵齿轮 (5) 的螺母 (6)。
- 将工具 (D) 和工具 (E) 安装到燃油泵齿轮 (5) 的两个螺纹孔中。 拧紧工具 (D) 和工具 (E),直到燃油泵齿轮 (5) 松开。
- 将工具 (D) 和工具 (E) 从燃油泵齿轮 (5) 上拆下。
- 将螺母 (6) 和弹簧垫圈 (7)(未显示)从燃油泵齿轮 (5) 上拆下。 卸下燃油泵齿轮。
Show/hide table
图 1 | g03383731 |
Caterpillar Information System:
C7.1 Engines Fuel Injection Pump Gear - Install
C7.1 Engines Fuel Injection Pump - Remove
C7.1 Engines Fuel Injection Pump - Install
C7.1 Engines Fuel Injection Lines - Remove
C7.1 Engines Fuel Injection Lines - Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install - M.C.S. Duplex Engine Oil Filter Base
C7.1 Engines Fuel Filter Base - Remove and Install
C7.1 Engines Front Cover - Remove and Install
C7.1 Engines Front Cover - Remove and Install - Heavy Duty Front Cover
C7.1 Engines Flywheel Housing - Remove and Install - Flywheel Housing that is Equipped with Rear Power Take-Off
C7.1 Engines Flywheel Housing - Remove and Install - Type A and Type B Wet Back End Housing
C7.1 Engines Flywheel - Remove
C7.1 Engines Fuel Manifold (Rail) - Remove and Install
C7.1 Engines Fuel Priming Pump - Remove and Install - Mechanical Priming Pump
C7.1 Engines Fuel Priming Pump - Remove and Install - Electric Fuel Lift Pump (EFLP)
C7.1 Engines Gear Group (Front) - Remove and Install - Heavy Duty Gear Group (Front)
C7.1 Engines Gear Group (Front) - Remove and Install
C7.1 Engines Glow Plugs - Remove and Install
C7.1 Engines Housing (Front) - Install - Heavy Duty Housing (Front)
C7.1 Engines Housing (Front) - Install
C7.1 Engines Housing (Front) - Remove - Heavy Duty Housing (Front)
C7.1 Engines Housing (Front) - Remove
C7.1 Engines Idler Gear - Install
C7.1 Engines Idler Gear - Remove