Fan Drive - Remove and Install
开始:
- 拆下风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装",以了解正确的步骤。
- 在风扇驱动组件 (3) 上作一个临时标记,以确定位置和方向。
- 将螺栓 (2) 从风扇驱动组件 (3) 上拆下。
- 拆下风扇驱动组件 (3) 和隔套 (1)(未显示)。
Show/hide table
图 1 | g03442180 |
- 检查风扇驱动有无磨损或损坏。 如果风扇驱动磨损或损坏,更换风扇驱动。
- 安装风扇驱动组件 (3) 和隔套 (1)(未显示)。 确保风扇驱动组件和隔套朝向正确。
- 将螺栓 (2) 安装到风扇驱动组件 (3),并用手拧紧。 将螺栓拧紧至扭矩
44 N·m (32 lb ft) 。
Show/hide table
图 2 | g03442180 |
结束:
- 安装风扇。 请参阅拆解和组装, "风扇 - 拆卸和安装",以了解正确的步骤。
Caterpillar Information System:
C7.1 Engines Fan - Remove and Install
C7.1 Engines Exhaust Manifold - Remove and Install - Top Mounted Exhaust Manifold
C7.1 Engines Exhaust Manifold - Remove and Install - Side Mounted Exhaust Manifold
C7.1 Engines Exhaust Elbow - Remove and Install
C7.1 Engines Engine Oil Pump - Remove
C7.1 Engines Engine Oil Pump - Install
C7.1 Engines Engine Oil Pressure Sensor - Remove and Install
C7.1 Engines Engine Oil Pan - Remove - Aluminum Oil Pan
C7.1 Engines Engine Oil Pan - Install - Aluminum Oil Pan
C7.1 Engines Engine Oil Filter Base - Remove and Install
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a Low Mounted Filter Base
C7.1 Engines Engine Oil Cooler - Remove - Engine Oil Cooler with a High Mounted Filter Base
C7.1 Engines Flow Control Valve - Remove and Install
C7.1 Engines Flywheel - Install - Equipped with Rear Power Take-Off
C7.1 Engines Flywheel - Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install - Non M.C.S. Arrangement
C7.1 Engines Flywheel - Remove - Equipped with Rear Power Take-Off
C7.1 Engines Flywheel - Remove
C7.1 Engines Flywheel Housing - Remove and Install - Type A and Type B Wet Back End Housing
C7.1 Engines Flywheel Housing - Remove and Install - Flywheel Housing that is Equipped with Rear Power Take-Off
C7.1 Engines Front Cover - Remove and Install - Heavy Duty Front Cover
C7.1 Engines Front Cover - Remove and Install
C7.1 Engines Fuel Filter Base - Remove and Install
C7.1 Marine Engine Engine Oil Filter Base - Remove and Install - M.C.S. Duplex Engine Oil Filter Base