Auxiliary Water Pump
Show/hide table
Illustration 1 | g03334098 |
Show/hide table
Specification for 379-8153 Auxiliary Water Pump Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 0S-1594 Bolt | Torque to |
2 | 1 | 9S-4190 O-Ring Plug | Torque to |
Show/hide table
Illustration 2 | g06323153 |
Rear view |
Show/hide table
Item | Qty | Part | Specification Description |
3 | 3 | 9S-8752 Full Nut | Torque to |
4 | 3 | 9M-2151 Taperlock Stud | Torque to |
5 | 1 | 5H-6734 O-Ring Seal | Before assembly, lightly lubricate the bore with glycerin or an approved equivalent. |
6 | 1 | 149-5462 O-Ring Seal | Before assembly, lightly lubricate the bore with glycerin or an approved equivalent. |
7 | 1 | 3D-2824 O-Ring Seal | Before assembly, lightly lubricate the bore with glycerin or an approved equivalent. |
Show/hide table
Illustration 3 | g03334100 |
Show/hide table
Item | Qty | Part | Specification Description |
8 | 1 | 7G-8478 Adapter | Torque to |
9 | 1 | 9X-4594 Lip Type Seal | Do not lubricate the sealing lip. |
10 | 1 | 212-8186 Impeller | Before installation, bore in the impeller for the pump drive shaft is |
11 | 1 | 7N-4758 Thrust Washer | Thickness of the new thrust washer is Width of groove in the pump drive shaft for the new thrust washer is |
B | 1 | 212-8180 Pump Drive Shaft As | Lubricate with a thin film of clean engine oil before pressing the impeller onto the shaft. The end of the shaft must be flush with the face of the impeller within Diameter over the impeller end is |
C | - | - | Distance from the impeller to the face of the pump housing assembly is |
Caterpillar Information System:
G3500 Engines Safety Messages
2013/06/17 An Improved Shaft Seal on the Cooling Fan Drive Group is Now Available on Certain Excavators and Mobile Hydraulic Power Units {1359}
3512B and 3516B Engines Engine Oil Cooler - Remove
2012/12/21 The Primer Color Has Changed for All C15 and C18 Truck Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Commercial Engine Blocks {1201, 7559}
2012/12/21 The Primer Color Has Changed for All C15 and C18 Machine Engine Blocks {1201, 7559}
3512B and 3516B Engines Radiator Group - Install
3512B and 3516B Engines Radiator Group - Remove
3512B and 3516B Engines Coolant Level Sensor - Remove and Install
3512B and 3516B Engines Engine Oil Pressure Sensor - Remove and Install
3512B and 3516B Engines Engine Speed/Timing Sensor - Remove and Install
2013/01/03 A New Fuel Metering Valve Is Now Used for Certain G3500 Engines {1270}
3500 Engines for Caterpillar Built Generator Sets Fan Drive
3500C Marine Engines Gear Group (Rear)
C1.5 and C2.2 Industrial Engines ARD Nozzle - Test
3500C Marine Engines Gear Group (Rear)
3500C Marine Engines Gear Group (Front) - Reverse Rotation
3500 Engines Flywheel Housing Cover
C7.1 Industrial Engine Engine Electronics
3500C Marine Engines Gear Group (Front) - Reverse Rotation
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Radiator
3500C Marine Engines Accessory Drive (Lower Left Hand, Reverse Rotation)