Cylinder Head Valves
Show/hide table
Illustration 1 | g03318091 |
Show/hide table
Specification for 378-7422 Cylinder Head Gp | |||
Item | Qty | Part | Specification Description |
1 | 4 | 316-5976 Spring | Length under test force is Test force is Free length after test is |
2 | 4 | 316-5977 Spring | Length under test force is Test force is Free length after test is |
3 | 2 | 316-5980 Valve Stem Seal | Install the valve stem seal to the inlet valves.
Before assembly, coat with engine oil. |
4 | 2 | 316-5981 Washer | Install the washer to the exhaust valves. |
A | - | - | Height from the top of the cylinder head to the top of the valve guides is |
5 | 2 | 197-6995 Valve Guide | Bore of the exhaust valve guide after installation is |
6 | 2 | 133-9306 Valve Guide | Bore of the inlet valve guide after installation is |
7 | 2 | 194-4897 Exhaust Valve | Before assembly, coat the exhaust valve stems with clean engine oil.
Stem diameter (B) is Valve diameter (D) is Face angle is 44.40 ± 0.25 degrees. |
8 | 2 | 210-2542 Inlet Valve | Before assembly, coat the inlet valve stems with clean engine oil.
Stem diameter (C) is Valve diameter (E) is Face angle is 19.40 ± 0.25 degrees. |
9 | 2 | 130-2608 Valve Seat Insert | Diameter of exhaust valve seat insert is Bore in the cylinder head is Face angle is 45.00 ± 0.25 degrees. |
10 | 2 | 130-2607 Valve Seat Insert | Diameter of inlet valve seat insert is Bore in the cylinder head is Face angle is 20.00 ± 0.25 degrees. |
Caterpillar Information System:
C27 Generator Set Model View Illustrations
3512B, 3512C, and 3516B Petroleum Engines and Petroleum Generator Set Engines with Dynamic Gas Blending Oil Pressure Is Low
3516B Engine Engine Speed/Timing Sensor - Clean/Inspect
3516C Locomotive Engine Fire Prevention and Explosion Prevention
3516B Engine Coolant - Change
3176C and 3196 Marine Engines Fumes Disposal Filter Element - Replace
2013/04/22 New Exhaust Valve Stem Seals and Rotocoils Are Available for Certain 3500B and 3500C Pleasure Craft Engines {1100}
C1.5 and C2.2 Engines for Caterpillar Built Machines Crankshaft Pulley
C1.5 and C2.2 Industrial Engines Engine Oil and Filter - Change
C1.5 and C2.2 Industrial Engines Engine Oil Level - Check
2012/12/19 A New Fuel Filter Base Assembly Is Used on C175 Generator Set Engines {1261}
420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230} 420-7630 Main Bearing Cap Lifting Device{0599, 0629, 0632, 0701, 1201, 1203, 1230}
3500 Engines for Caterpillar Built Generator Sets Vibration Damper Guard
3500B High Displacement Balancer Group (Front)
3500B High Displacement Camshaft
3500C Marine Engines Engine Oil Pan
3500B High Displacement Cylinder Block
3508B Industrial Engines Crankcase Breather
3500 Engines for Caterpillar Built Generator Sets Engine Oil Filter
3500 Engines for Caterpillar Built Generator Sets Engine Oil Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500B High Displacement Air Inlet and Exhaust Lines
3500C Marine Engines Flywheel
3500B and 3500C Marine Engines Engine Mount (Front)