Hood (Rear) - Remove and Install
拆卸步骤
Show/hide table
所需工具     | |||
工具     | 零件号     | 零件描述     | 数量     |
A     | 138-7573     | 连杆支架     | 3     |
Show/hide table
车斗降下后,车斗与机架之间没有空隙。 如果不安装固定缆线,可能会导致在此区域作业的人员受伤或死亡。 |
- 请参阅操作和保养手册, "拉线(车斗固定)"。
- 打开后发动机罩组件 (1) 。 将后发动机罩组件 (1) 固定到打开位置。
Show/hide table
图 1 | g03090139 |
- 将工具 (A) 和适当的起吊设备连接到后发动机罩组件 (1) 上。 后发动机罩组件 (1) 的重量约为 120 kg (265 lb)。
Show/hide table
图 2 | g03090243 |
- 断开支撑 (2) 。 断开支柱 (3) 。
Show/hide table
图 3 | g03090245 |
- 拆下螺栓 (4) 。 拆下后发动机罩组件 (1) 。
Show/hide table
图 4 | g03090256 |
安装步骤
- 按与拆卸相反的顺序安装后发动机罩组件 (1) 。
Caterpillar Information System:
797F and 797F XQ Off-Highway Trucks Machine Systems Hood (Front) - Remove and Install
797F and 797F XQ Off-Highway Trucks Machine Systems Ladder - Remove and Install
3516B Engine Model View Illustrations
3500B High Displacement Turbocharger Oil Lines
3512B and 3516B Generator Set Engines with Dynamic Gas Blending Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500 Engines Turbocharger Oil Lines
3500B High Displacement Turbocharger Oil Lines
3500 Industrial Engines Cylinder Head Valves
C7.1 Industrial Engine Soot Antenna
C7.1 Industrial Engine Fuel Filter (In-Line) - Replace
C7.1 Industrial Engine Turbocharger - Inspect
2014/03/07 New Exhaust Elbows and Bellows Are Used for the Turbine Inlets on Certain G3516B and G3520B Engines {1052, 1059}
3516B Engine Product Description
797F and 797F XQ Off-Highway Trucks Machine Systems Engine Shutdown Switch and Disconnect Switch - Remove and Install
3516B Engine Plate Locations and Film Locations
3516B Engine Refill Capacities
3500C Marine Engines Turbocharger Oil Lines
3500 Industrial Engines Engine Oil Pan
797F and 797F XQ Off-Highway Trucks Machine Systems Radiator Grill - Remove and Install
3516B Engine Engine Oil Level - Check
C280-12 and C280–16 Marine Engines Engine Oil Filter Housings - Install
3500B Engines for Caterpillar Built Power Modules Engine Oil Cooler Bypass and Cooling Jet Sequence Valves